I was at an estate sale last weekend, walked by these floor speakers and didn't think to look at them. I came back around and googled them "Canton CT-1000". My jaw just dropped as to what people said about them, so i quickly bought them. they were tagged for $200, but being sunday, got them for $100 a pair. Based on my research, the originals were 1200, but these are the ones that went for $2500 in the mid to late 80s, with the tweeter and midrange right next to each other. Mahogany wood cabinet.
I will need to refinish one of the cabintes, because it was set down upsidedown and is scratched up because of it.
I don't have a 4 ohm receiver, but my Pioneer SX-3700 claims it can handle it. so i hooked them up. NO SOUND FROM THE WOOFER. So i took the woofer out and found that the wire had been cut on both. Seems strange. connected the wires back up and voila, awesome speakers. Now i'm not sure whether to keep them and sell my Polk Monitor 7s or sell them and keep the Polks.
On a side note. Anyone have any ideas as to why someone would cut the woofer wires? seems rather odd, the speakers were screwed back in as if they did it on purpose. Doesn't seem like the woofer was replaced, and it looks like an authentic Canton, with the name stamped on the speaker frame.
I'll take pics next week sometime.
I will need to refinish one of the cabintes, because it was set down upsidedown and is scratched up because of it.
I don't have a 4 ohm receiver, but my Pioneer SX-3700 claims it can handle it. so i hooked them up. NO SOUND FROM THE WOOFER. So i took the woofer out and found that the wire had been cut on both. Seems strange. connected the wires back up and voila, awesome speakers. Now i'm not sure whether to keep them and sell my Polk Monitor 7s or sell them and keep the Polks.
On a side note. Anyone have any ideas as to why someone would cut the woofer wires? seems rather odd, the speakers were screwed back in as if they did it on purpose. Doesn't seem like the woofer was replaced, and it looks like an authentic Canton, with the name stamped on the speaker frame.
I'll take pics next week sometime.
