• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

New to Forum

D

dgreger

New Member
Thought I'd introduce myself, and list my systems:
Main Theater: Yamaha RX-V665, Carver TFM-15, Samsung BD-C6900 Blu-Ray, Audiosource EQ-One Series II (Replaced the Red and Green LEDs with Blue and White), Samsung UN46C7000 3D LED, Polk R50 Main, Polk RC85i Center, Polk RC55i Rear and Back, Cerwin Vega SUB-10 Logitech Harmany 1100.
Living Room: Yamaha HTR-5960, Carver TFM-6CB, Yamaha DV-S5650 DVD, Polk M3 front and Rear, Cerwin vega HT-10D, RCA F38310 HDTV.
Computer System: Yamaha T-50, Carver C-5, Carver TFM-6CB, Cerwin Vega VS-80.
Garage:Yamaha HTR-5140, Yamaha NS-AW350 Indoor/Outdoors, Cerwin Vega HT-12D.
Idle gear Carver Reciever MXR-2000 (brother-in-law has, says it doesnt work, GIVING it to me!), Yamaha C-80, Yamaha M-80 (needs repair), Audiosource EQ-One (replacing LEDs, haven't decided on what colors yet!)

The M-80 has the dreaded SGBD, Protection light stays on, now that its winter I will have time to open it up and start repairing/replacing parts after reading the posts here! can't wait to fire it up again, thinking of using it to power a set of Wharfedale 9.5s I just picked up in a 2 channel system.
 
Register to hide this ad
Well, the M-80 isnt in as bad shape as I thought. Protection light does Not stay on and the amp is running very well in my test setup. Sony CD to Carver DPL-33 as a pre, then M-80 into a pair of Klipsch 3.2s I downloaded the Service manual and am getting ready to take some measurements. After which I want to re-cap, and re-diode, and upgrade the speaker terminals to newer binding posts. Then give her a full cleaning.
 
You must log in or register to reply here.
Back
Top Bottom