Alex Estrada
New Member
I acquired a Teac A-6100 two years ago and had it fully serviced by the Audiowright shop here in Columbus, OH. I never got around to trying recording on it, but I now finally have the funds and time to make some mixtapes. I've never used a reel to reel, and in the time that I've had the Teac, I never got around to buying any blank tape or a take up reel for the machine. I'd like to stick to 10.5" reels (already have hub adaptors) for record time and aesthetics.
I've done lots of needle drops to cassette, so I feel I understand the basics of recording and operating the machine, but I have several questions before getting started.
The machine has sat unused since its service two years ago, though it functions identically now as then (albeit without any tape to test) when powered on and inspected. Will I be OK?
Where's a good place I can acquire a 10.5" take-up reel for the Teac?
What would be some good options for blank tape for my particular machine? Looking for 10.5" options as I mentioned above, and the machine was given a "middle of the road" biasing when last serviced (young me didn't know anything about reel to reel when I got the Teac).
Any other advice is much appreciated
Thanks in advance for the help, I'm really excited to finally make some .5 inch, 2-track recordings!
I've done lots of needle drops to cassette, so I feel I understand the basics of recording and operating the machine, but I have several questions before getting started.
The machine has sat unused since its service two years ago, though it functions identically now as then (albeit without any tape to test) when powered on and inspected. Will I be OK?
Where's a good place I can acquire a 10.5" take-up reel for the Teac?
What would be some good options for blank tape for my particular machine? Looking for 10.5" options as I mentioned above, and the machine was given a "middle of the road" biasing when last serviced (young me didn't know anything about reel to reel when I got the Teac).
Any other advice is much appreciated
Thanks in advance for the help, I'm really excited to finally make some .5 inch, 2-track recordings!
