• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Optimal cartridges with C-33

Hi,

I have a C-33 preamp and just acquired a Thorens TD 2030 turntable (Rega RB300 tonearm with no cartridge). From the Berners website, I realize that the input impedance is 47kohms and cap is 65 pf, with the sensitivity of 2mV for 2.5 output. I am not quite sure as to what it translates into as far as selecting a cartridge goes. Can I use a low-output cartridge with this amp? Also, does it matter if it is a MM or a MC cartridge? Any advice/suggestions? I was thinking of picking up a Denon DL 103 or 103R or a Sumiko Blue Point Special EVO-III HO MC.
 
Last edited:
Register to hide this ad
High output Moving Coil or Moving Magnet will work. Lots to chose from.

Thanks,
Ron-C
 
The Sumiko Blue Point would work very well with that preamp, but why stop there?

Get another TT and install one of the Denon cartridges in it; you've got 2 phono stages.
 
Umm, if you look at my cryptic signature, I do have another TT (which is a Music Hall MMF 7) which has a MC cartridge (standard Goldring Eroica H HOMC). If I buy a 3rd turntable, I might have to move in with one of you guys.....:D

The Sumiko Blue Point would work very well with that preamp, but why stop there?

Get another TT and install one of the Denon cartridges in it; you've got 2 phono stages.
 
there was a step up transformer Mcintosh made for MC carts, its rare though, sure wish I could get one.
 
there was a step up transformer Mcintosh made for MC carts, its rare though, sure wish I could get one.

You can get the updated replica of the McIntosh MCP1 from AudioClassics (named ACP1). I've got one coupled with my C32 and a Denon 103R. It's great. You can read the specs from their site. Same specs but with a better S/N ratio.

-Mike
 
You can get the updated replica of the McIntosh MCP1 from AudioClassics (named ACP1). I've got one coupled with my C32 and a Denon 103R. It's great. You can read the specs from their site. Same specs but with a better S/N ratio.

-Mike

thanks! I actually had no idea! I'm gonna look into it.
 
Back
Top Bottom