• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Output caps for 2265B

tscott33

New Member
Hi,
I am re-capping a 2265B for a friend. The output caps are 1,000 uF and 55V. Should I just stick with that? I've used Nichicon Gold Tunes before with excellent results on a 1060. However, when I did the 1060 I increased the capacitance to 6800uF on the output caps.

My understanding is that these 2265B amps sound pretty amazing with stock components, any value added in trying to improve it? Any risk to stressing the power supply?

I realize that this may be a loaded question with no "right" answer.
 
Register to hide this ad
2265B isn't a capacitor coupled amp. I assume you're talking about the 10000uF filter caps.

You won't be able to find 55V filters today, so stepping up to 63 or 80V is OK. I'd stick with the 10000uF value.
 
The manual for the 2265B says 1000uf 55v, are you sure that is correct? that seems very small for a powerful receiver like that.

Too Quick Jailtime
 
Last edited:
My bad. You are correct. They are PS filter caps and not output coupling caps.

The service manual does have them at 1000uF (Ref Des is C003 and C004) on page 32. But when I look at the actual components they are clearly marked at 10000uF. I'll just stick with 10000uF.
 
My bad. You are correct. They are PS filter caps and not output coupling caps.

The service manual does have them at 1000uF (Ref Des is C003 and C004) on page 32. But when I look at the actual components they are clearly marked at 10000uF. I'll just stick with 10000uF.

Please post the error you found in the Marantz Service Manual Error thread.

Tom

2265B SM error updated in the error sticky. Thanks for pointing this one out!
 
Back
Top Bottom