I have a tendency to jump to this forum before I have all relevant info---sorry.
The current issue may be more my speakers. I'm testing the system using a Kate Wolf CD that has always sounded great on my previous systems. I did not like how it sounded the other day and have been wondering. New system is a PAS2, Citation 5 and AR3a speakers. Kate was sounding harsh and fuzzy. I need to recap the speakers but my order for caps is taking forever to get here. Only one local supplier and they don't have anything for crossovers (no NP caps, etc.).
I turned the high pots on the speakers to a little bit decreased with the mid pot mostly boosted and the sound was better. Pulled the cover off the PAS2 and swapped the tubes in what I think is the output portion. The PAS came with Telefunkin tubes but they were used, chalky writing mostly rubbed off. I put in a pair of Heathkit/Mullards. To me the sound improved.
The caps on the PAS tone controls have been replaced but it seems to me the tone controls have been disabled. The caps on the volume control are original and those are in the signal path, right? I assume the previous owner had not finished his refurb and may not have known what mods had been previously made. I'm also a bit worried by reading that the PAS2 will transmit some DC to the amp. I had the Citation completely refreshed by a technician I trust who put in all of McShane's mods.
If I can borrow a preamp from a friend, I may turn my PAS over to my tech. I know he has one he has redone.
So, there isn't really a direct question here. Just looking for impressions from people who know a lot more than I do.
The current issue may be more my speakers. I'm testing the system using a Kate Wolf CD that has always sounded great on my previous systems. I did not like how it sounded the other day and have been wondering. New system is a PAS2, Citation 5 and AR3a speakers. Kate was sounding harsh and fuzzy. I need to recap the speakers but my order for caps is taking forever to get here. Only one local supplier and they don't have anything for crossovers (no NP caps, etc.).
I turned the high pots on the speakers to a little bit decreased with the mid pot mostly boosted and the sound was better. Pulled the cover off the PAS2 and swapped the tubes in what I think is the output portion. The PAS came with Telefunkin tubes but they were used, chalky writing mostly rubbed off. I put in a pair of Heathkit/Mullards. To me the sound improved.
The caps on the PAS tone controls have been replaced but it seems to me the tone controls have been disabled. The caps on the volume control are original and those are in the signal path, right? I assume the previous owner had not finished his refurb and may not have known what mods had been previously made. I'm also a bit worried by reading that the PAS2 will transmit some DC to the amp. I had the Citation completely refreshed by a technician I trust who put in all of McShane's mods.
If I can borrow a preamp from a friend, I may turn my PAS over to my tech. I know he has one he has redone.
So, there isn't really a direct question here. Just looking for impressions from people who know a lot more than I do.