• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Pioneer cs-77a tweeters unobtanium?

Copa1934

My ears are bleeding
Long story, sort of. Acquired a pair of CS-77a speakers. One had fallen from a shelf, 12', onto a cement floor (in the garage). Got them for something like $5, or thereabouts. There was no way I could repair the damaged cabinet. Was like it exploded on impact. So parted them out, keeping just the networks and the one good cabinet.

Fast forward and a friend gave me a orphan CS-77a, complete. Need drivers and a grill, for my old cabinet to make a complete set.

Problem is, all but the tweeter (77-702F) are readily available. Are these tweeters typically difficult to come by? I know they usually need foam, but are people simply tossing them rather than re-foam?

Thanks
 
Register to hide this ad
I've managed to locate one 702F.

http://www.bonanza.com/listings/Pioneer-77-702F-Tweeter-from-CS-77A-Vintage-Wrkng-/259886872

If the 701F's are compatible they are much more readily available from OakTreeVintage.
For what they're asking I might look at P.E. for a "replacement". All the other drivers are fairly reasonable, though the best deals are pairs. I don't mind as I can pick the best "match" and sell off the other drivers. I'll just have to be patient I guess.
 
Your in luck Copa, there is a single 77-702F tweeter on the pay site for $25 with a buy it now option. Good luck.
 
Dang Francis... If we met about 3 months before we did, I would of had ya set :(

I know these won't work for the CS-77a, but I do have single Pioneer PT-204 and PT-257a tweeters if you can find a use for either of them
 
I still have the CS-77a cabs though if you want them!!
I do. Hmmmm. If at least one is better than the one I received recently, from Pete, then I could make up a nice pair. The "other" cabs I could use for the HPM-60 project.
 
They can use a Howards job or something better, but they are solid wood with no major chips (as far as I know)
 
I've got parts from a 77a -- grill, one woofer, two mids, two 77 tweeters (need refoaming, alas) and the horn tweeter.
PM me - even though packing will be a hassle, they aren't doing me any good here.
 
I hope these work out for your Copa. I have a fondness for my 77a's - although I find them to be very amp picky. The best I had with them was connected to my Sansui 9090 in the living room of my old house. The room was a bit lively (plaster walls, wood floor) but the soundstage and imaging was just incredible. I remember watching movies and it sounding like overhead voices were coming out of my ceiling. I could really get those woofers moving too. Very cool. However with other amps the speakers went flat and lifeless. Very peculiar. I really need to recap them though - have the parts just not the time. Let us know how it goes.
Tiga
 
I hope these work out for your Copa. I have a fondness for my 77a's - although I find them to be very amp picky. The best I had with them was connected to my Sansui 9090 in the living room of my old house. The room was a bit lively (plaster walls, wood floor) but the soundstage and imaging was just incredible. I remember watching movies and it sounding like overhead voices were coming out of my ceiling. I could really get those woofers moving too. Very cool. However with other amps the speakers went flat and lifeless. Very peculiar. I really need to recap them though - have the parts just not the time. Let us know how it goes.
Tiga
I figure if I don't get too much invested, caps would be in order. Josh is a good friend, so I'll have to take him up on the cabinets. I have one really nice one. If he has a good match then it will certainly make it more worth while.

I don't "need" speakers, but I certainly don't want them going to the landfill either.
 
Back
Top Bottom