Pioneer CS-A500 question

[Bloodnok]

I am restoring a pair of these and have a question for the brain trust. The paired posts for the Multi-Channel setup have wires connecting all 3 of the posts. On one of the speakers, the wire for the right 3 posts is missing. Will this matter or affect the performance if using the full-range setting?

Thx

 

[eiraved]

Have you checked the manual? It is available online and it doesn’t show any wires connecting the terminals on the multi- channel setup.

 

[Bloodnok]

I haven't been able to locate a manual...

 

[malden]

It looks to me like those wires should not be there if you are using them "full range"

 

[malden]

schematic

 

[malden]

pictorial

 

[eiraved]

I haven't been able to locate a manual...

hifi engine has the manual, if you have access to their library. Good thing is @malden has provided you all you need from the manual.
I also don't believe those wires are necessary, not sure why they were installed.

 

[malden]

@Bloodnok , was any of this helpful?

 

[Bloodnok]

Yes, it's all good stuff. I don't have access to HiFi Engine, but I don't see any problem with just pulling the wires. I don't ever intend to use the 2- or 3-channel setup, so it's all good from here.

Now, if asnyone has a spare woofer or tweeter for one of these things, I'd love to hear about it...

Thanks again.

 

[malden]

Now, if asnyone has a spare woofer or tweeter for one of these things, I'd love to hear about it...