Pioneer CT-F750 belt replacement assistance

[Jim Mas]

Hello first post so please excuse my general ignorance. Found a nice old Pioneer CT-F750 of course belts are goo so I ordered a new kit. This of course did not have instructions / belts labeled. So I've figured out the main Capstans belt. Have the service manual. However, having trouble matching the other belts. There are 3 narrow belts of one size, then 1 slightly smaller, and 1 slightly larger. Suggestions for more resources before I go trial and error method?

Jim

 

[oldvinyldude]

I just completed a rebelt job on a CT-F 1250 using a kit from: (no affiliation) http://www.wjoe.com/vintageandantiques.htm

I know you already have belts, but the kits are modestly priced. The included instructions are VERY helpful. Main item learned was how to split the transport in half to access and replace the capstan belt.

I am trying to replace the main belt on a Denon DR320, and I can't figure out, for the life of me, how to do this on their transport.

 

[Jim Mas]

Thank you for the suggestion. Fortunately, I was able to size them up with some trial and error and lucky for me it all worked out. I purchased the belt kit (aka $30 bag of rubber bands lol) from vintage-electronics.net. While they were not labeled/bagged separately, the arrived fast and it works.