• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Pioneer CTF950

Westy56

A symphony of paradox
I saw a pioneer ctf 950 cassette deck for $60 bucks at an estate sale.
They will probably settle for $30.

Is it a good buy for this deck?

It isn't connected to anything but all of the functions work.

Thank you
Steve
 
Register to hide this ad
The machine iw worth it, but is over 30 years old, so will likely need some restoration (belts, reel idler, and reel motor rebuild, at a minimum). Expect to have to put some additional funds in to have a nice deck.

Enjoy,
Rich P
 
Expect to have to put some additional funds in to have a nice deck.

Enjoy,
Rich P


I have two Nak decks that need some TLC right now.

The price to achieve the pioneer is negligible.
Its the money to bring it up to par that scares me.

I would have given my left arm for one of these back in high school.

Thanks
Steve
 
Very reasonable prices.
I'm starting to feel that buyers compulsion.

Will I like this as much as my RX303 or MR1?

Thanks for the link

Steve
 
Very reasonable prices.
I'm starting to feel that buyers compulsion.

Will I like this as much as my RX303 or MR1?

Thanks for the link

Steve

Estate sale?............ BUY IT....... It'll by gone by the time you wait for advice....:yes:
 
Just my 2¢ - If you can't/don't want to replace all the belts, and clean the mechanism, clean the heads, clean the rollers (by the way, DON'T use alcohol on the rollers, or any other rubber parts, use a rubber renewing formula), etc., pass on the tape deck.

You would probably not want to sink the $$ into it for someone else to do it for you, that will do it correctly anyway.

Let me put it this way: I have a CT-F1050 in decent shape, except needing all the afore-mentioned service. I work as an audio repair tech, I have all the parts/equipment I need here at the house, know what I need to do and how to do it, etc. As soon as I got the drive out of the unit (which only took about a half-hour, or $30 of time), I looked at it, and what I was going to have to do to re-belt it, and I just sighed and put it aside. I can't even afford to pay MYSELF to fix it right now!:D

Seriously, based on what I had to do recently to refurb a beautiful Marantz SD-4000, which was about $150 worth of time/parts, vs. how much someone else was willing to pay to buy the deck, I may as well give the rest of my cassette deck "collection" away :tears:

Then again, if i did that, there'd be some pretty happy people if they could spend the time to refurbish them themselves.:music:

Man, I just realized how many cassette decks there are in the garage that I haven't gotten to yet. :scratch2: Maybe I'll try to patch up a couple of the more fun ones and bring them to the AK gathering here in Atlanta next weekend, just for listening fun.

If anyone wants to vote for your favorite contender/s, here's a list of what's out there, just off the top of my head:

Pioneer CT-F550, CT-F650 (the first flouroscan one), CT-F1050
Marantz SD-8000
Vector Research VCX-500
Bang & Olufsen Beocord 8004 HX-Pro, Beocord 5000 (the older version), Beocord 2200 (older version), Beocord 1600, Beocord 2400
Nakamichi LX-3 (but it's missing the right door panel :sigh:)
Luxman K-220
Teac C3, A510
NAD 6340

After the AK event is over, maybe I'll pick the one I really want to keep, and then post a bunch of ads here at AK for what's left over. Most likely anything I haven't repaired yet will be REAL cheap :D.

Don
BT
 
I Caikleened the rubber, Handi-maged and cleaned the heads.

It sounds like the freq response tops out at 1k.

I never considered that the heads would be worn.

Oh well

Steve
 
Back
Top Bottom