cjb1963
New Member
Hello, looking for help with my E6 xo's, for some reason unknown to me I am getting a 42ohm resistance reading on both the xo I recapped and the other unmolested one. I cannot find a schematic for these and am at a loss. I bought the drivers and built my own cabinets and when I hooked up the first finnished speaker I immediatley noticed it took alot of twist on the volume to get nominal sound output and that is when I tested and found the 42ohm readings. O n the rebuilt xo I just replaced the caps with original values and left the coils and resistors alone. There is what looks to me to be a curcuit breaker that I tried jumping with no results. Stumped, any thoughts, suggestions or other help would be much appreciated, thank you. P.S. THE DRIVERS ALL TEST FINE.