Pioneer HPM 100 recone drivers

[nackesww]

I'm giving my son a pair of HPM 100's. They were out in my woodshop for many years and they both need a lot of work. re-veneer, new speaker fabric, Recap and recone both woofers and 1 mid and tweeter.
I've never done a recone but I'm sure we could handle it. I'm usually good at finding whatever I'm looking for on the internet but I cant seem to find recone kits for these drivers. I would think for how popular these are there would plenty of kits available somewhere. Any help would be appreciated. Thanks

 

[Farmhand]

Do they need new cones, or new surrounds?

 

[goodolpg]

Big difference between reCONING and reFOAMING.
Thanks to spellcheck and/or people who do not know the proper term one is often substituted wrongly for the other.
Which is it?

 

[nackesww]

the drivers blew. So I would say new cones.

 

[nackesww]

OL on the ohm meter

 

[goodolpg]

Could be as simple as the wire between the terminal and the voice coil.

 

[nackesww]

to get any further into the driver to check for a broken wire I believe I would have to pull the dustcap.

 

[goodolpg]

I see you are new here, you might want to ask in the Pioneer section (normally you are supposed to pick only one forum per question, but being new maybe it will be ok), those folks have a lot of knowledge about most all things Pioneer.