xXColdShotXx
Active Member
Would anyone have a list of caps and transistors list for the Pioneer PL-518? Thanks in advance to who may have a list.
Pioneer PL-518 Recap
- Thread starter xXColdShotXx
- Start date
Register to hide this ad
The only boards in the PL-518 are the power supply boards. And you can take and make a list (2 transistors & about 8 electrolytic caps) from the schematics. Service manual here. http://www.kallhovde.com/pioneer/Pioneer/Main scan page.html Scroll down to PL-518. Verify schematic values with the actual boards. If there are differences, use the values on the BOARD.
2sc945 = 512-KSC2383Yta in stock Mouser. $0.46ea
2sd234 = 512-KSC2073TU in stock Mouser $0.65ea
Download the DATA SHEETS for both transistors for the PINOUTS. 99% chance of them being different than the originals.
I would use Nichicon UPW or UHE series for the Electrolytics. Leave the Film and or Styrene caps alone.
2sc945 = 512-KSC2383Yta in stock Mouser. $0.46ea
2sd234 = 512-KSC2073TU in stock Mouser $0.65ea
Download the DATA SHEETS for both transistors for the PINOUTS. 99% chance of them being different than the originals.
I would use Nichicon UPW or UHE series for the Electrolytics. Leave the Film and or Styrene caps alone.
xXColdShotXx
Active Member
C2 CEA 331P 50 = 667-EEU-FC1J331 330uF 63v
C3 CEA 101P 25 = 667-EEU-FM1E101 100uF 25v
I had all parts on hand and swapped them out, so far so good.
C3 CEA 101P 25 = 667-EEU-FM1E101 100uF 25v
I had all parts on hand and swapped them out, so far so good.
