Pioneer Spec 2 Issue

[xXColdShotXx]

I think the spec 2 is done. I put all of the components in except the 2 relays on AWR-093 board and C19 on AWM-081 board. Now I gotta wait to either get equipment to set the Ω loads and meters or get a close by tech to adjust it.

 

[zebulon1]

Good job!!

 

[xXColdShotXx]

Thanks. Thanks for the info you provided.

 

[xXColdShotXx]

Anyone know the digikey or mouser part # for the green quick disconnect strips with screws I see people put of some PCB's? I may have to get some to keep from have to take the output transistors in and out so much. Are there any for the Spec 2?
You have to versify pin spacings to see if these will work. These are 7,5mm spacings and come in 2 & 3 pin version that gang together to make larger.
T/E(AMP) models 282844-2, 282844-3
Both are available at Mouser or Digi-key

Do either of these models fit the SX-1250 AWF-021 board?

 

[rcs16]

I do not know, would have to measure to be sure.

 

[xXColdShotXx]

They are 7.5mm spaced and fit the SX-1250 AWF-021 EQ board.

Anyone know how thick the volume plastic is for the Spec 1? I need to get it deox'd.