xXColdShotXx
Active Member
I was listening to a Spec 2 for around 5 to 10 minutes with my Yamaha CX-600/U pre-amp hooked up and all the sudden it pops and goes into protection mode with the Right meter almost on 500 when turned on at any given time, I felt of the Right channel speaker wire and it was kind of hot. I only had 1 speaker hooked up at the time. I checked the Left channel and it worked good before the pop and going into protection mode, so was checking the Right channel and that's when it popped and went into protection mode. The matching Spec 1 also has a Right channel issue where it plays, but it's all high output with very little bass, but the Left channel plays good. I am thinking the Spec 2 had an issue long before I got it and it caused the Spec 1 Right channel to mess up. Any help will be appreciated.