Hey -
I recently purchased a Pioneer SX-1000TW and a Technics SL-D2 and there is a humming/buzzing noise when the right channel is selected along with minimal output, left is fine, and in stereo--as you might imagine--the hum is present, but lessened. I get the same noise when I connect my Audiotechnica LP-60. Further, if I touch/move the red (right) audio jack the hum worsens. However, when I connect my Denon DP-300F the problem is solved.
I am assuming that this is an audio cable or ground cable issue.
Any ideas on how to fix this issue?
Thanks,
Will
I recently purchased a Pioneer SX-1000TW and a Technics SL-D2 and there is a humming/buzzing noise when the right channel is selected along with minimal output, left is fine, and in stereo--as you might imagine--the hum is present, but lessened. I get the same noise when I connect my Audiotechnica LP-60. Further, if I touch/move the red (right) audio jack the hum worsens. However, when I connect my Denon DP-300F the problem is solved.
I am assuming that this is an audio cable or ground cable issue.
Any ideas on how to fix this issue?
Thanks,
Will