Pioneer SX-680 fuse replacements

[jmsdvdp@aol.]

I have recently acquired a Pioneer SX-680 that is in incredible condition. I'd like to get some fuses just to have on hand but am having trouble finding what would be the correct replacements that are available now. The below list is what's called for in the service manual, but I can't determine if they are slow blow or not, and what the current fuses would be. I've indicated what they appear to be for from looking at the boards but am really worried about getting the correct fuse for each so I don't mess something up should I ever have to replace them. Thanks so much for your help in advance! I'm really new to this level of the hobby and all your help on this site is incredible! Thanks!
AEK-100 FU1 4A (for the power supply?)
AEK-104 FU2 1.5A (for the 3 lamps; they've been replaced with LED's?)
AEK-108 FU3 5A (for left speaker?)
AEK-108 FU4 5A (for right speaker?)

 

[larryderouin]

These all should be "AGC" Type glass fuses. 125v / whatever amps marked. Easiest is to go down to Home Depot and get fuses in the Electrical dept. These will be 250V / whatever amps. The voltage is the MAX rating, so you can go up. Keep the AMPS the same. The fuses come in a 5 pk.

 

[jmsdvdp@aol.]

These all should be "AGC" Type glass fuses. 125v / whatever amps marked. Easiest is to go down to Home Depot and get fuses in the Electrical dept. These will be 250V / whatever amps. The voltage is the MAX rating, so you can go up. The fuses come in a 5 pk.

Thanks for the info...just getting back into this stuff and lots to catch up on! Thanks!