Polk Audio 10A Crossover question,

[peerlespaul]

In the monitor 10A Crossover there is an component that is labeled TI E-0012-1 12J100V what is this part? It appears to be a capacitor but no value.

Other components are 34uf cap 12uf cap 2.5ohm and a 2.7 ohm resister.

Ive got an order ready to go to rebuild them but I need to identify that part.

They are the model 10A consecutive ser#'s fuse holder type.

 

[painttoad]

TI E-0012-1 12J100V

my guess is a 12uf 5% 100v capacitor..sounds like a film cap that could be left alone

a pic might help

 

[peerlespaul]

 

[peerlespaul]

left hand bottom picture yellow e-0012-1 component/ ive been looking for 10A schematic but have not been able too as of yet

 

[painttoad]

left hand bottom picture yellow e-0012-1 component/ ive been looking for 10A schematic but have not been able too as of yet

thats a film cap. you can leave it be.

12uf 5% 100v if you decide to upgrade

 

[painttoad]

Monitor 10A Crossover Upgrade/Fix

I've read that updating the crossovers makes a big impact on these speakers.

forum.polkaudio.com

 

[F1nut]

It's a 12uF 100volt Mylar cap. Upgrade it too.

 

[F1nut]

Do NOT copy that disaster, wrong on multiple levels.