• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Polk Tweeters

lileddy

The Dude abides.
I have a set of RTA 8TL speakers and have already replaced one SL2500 tweeter. Now another one opened up on me. I guess I need to rebuild (re-cap) the crossover on these. The volume was relatively low when it went out, I was surprised. The last one I replaced with a used one found on ebay, but can only find the sl2000's now. Can the sl2500 be replaced with a sl2000? Are the specs close?

Thanks for your help,
the dude
 
Register to hide this ad
No, not with the 2000 as far as I know. At least without some xo mods. You should call Polk CS. I think you can upgrade to the RDO198 tweeter without any mods. A MUCH MUCH better tweeter than the SL series.
 
That looks quite similar to the monitor 6 and 8 tweeters from the 70's/80's those had a felt ring inside. My dealer used to call them the fried egg tweeter and yes they do tend to fail for no apparent reason. I had to replace both on my 8's over the five years I owned them in the 80's. With some crossover mods would the peerless tweeter fit the cut out?
 
Jeesh, I was going to sell these speakers so I bought a replacement tweeter off ebay. On the morning when a buyer was coming over I was running some CCR through them when I noticed left channel volume went lower. Upon further inspection, left channel was lacking highs. Put a reading on it and ouch! read open. Had to call the guy and deliver the bad news before he arrived. He did make me a low ball offer but I declined, you know funny things is I started liking those speakers. So I'm going to replace the tweeter, (or tweeters) and keep them for a while...again. They really tie the room together, kinda, anyway.

I will look into that RDO198 upgrade. will post back on findings.
Thank you guys for your help.
Duder
 
Back
Top Bottom