Super Noob
Super Member
Few weeks back, I stumbled on a local Fluoroscan. It was non-working and was concerned that the outputs many have been blown (from what I read).
Though not the top of the heap SX-3900, the SX-3800 boasts 60 WPC (not too shabby).
Here is how she arrived.
It would not pass the DBT... so here is where I deviated from the typical scrip of fixing an issue before rebuilding. In order to work on the power supply and amp board = some disassembly required.
To get access, I de-soldered the rows of wire wrap modules form the boards.
Pic of the outputs:
All were changed - what a mess.
Let get the build post rolling.
Though not the top of the heap SX-3900, the SX-3800 boasts 60 WPC (not too shabby).
Here is how she arrived.
It would not pass the DBT... so here is where I deviated from the typical scrip of fixing an issue before rebuilding. In order to work on the power supply and amp board = some disassembly required.
To get access, I de-soldered the rows of wire wrap modules form the boards.
Pic of the outputs:
All were changed - what a mess.
Let get the build post rolling.