Project Preamp Box S Settings for Ortofon 2M Bronze

[johnhare]

I need some help with the proper dip switch settings for the Ortofon 2M Bronze utilizing the Project Box S Preamp. The Project manual gives the settings for the 2M Red, but I would doubt that they would be the same. Specific switch by switch comments and settings would be appreciated.

 

[redcoates7]

Both the 2M Red and 2M Broze list the same recommended load resistance and capacitance, so you'll be good following the 2M Red settings:

Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF

http://www.ortofon.com/ortofon-2m-bronze-p-325
http://www.ortofon.com/ortofon-2m-red-p-317-n-1579

 

[Duane]

I have the same preamp and have had the 2M Blue, Bronze and Black. The settings I used for my JVC turntable was 200pf capacitance along with the 47K impedance. There are two output options for MM carts, 40 and 43 db. I 've used both and ended up leaving it at 43 so it would match the levels of other components.