Question about Technics SA-AX6 vs. SU-G90

[Ma61]

Hey everyone, just wondering if anyone can help me find the specs for my Technics SU-G90 receiver.
I have searched far and wide on google and cant come up with a spec sheet.

I have had this receiver for about 12 years, and I have been running some Technics SB-SL701's which have been just fine.
Pictured here:

I finally decided to upgrade and the other day I got my new Polk Monitor 70 Series II in the mail, hooked them up and they sound great!

So I found a Technics SA-AX6 Receiver on ebay and I was thinking that I might upgrade, but I dont know if its necessarily an upgrade. (because I dont know the specs of my G90..)

The reason I want that and not another brand (for now) is because I would like it to match the rest of the technics equipment that I have (cd changer EQ tuner tape deck).

I also want it because its 5.1, since I also bought a cs2 center ch with my m70's, but I dont know if I'm better off spending more money and abandoning my Technics setup or getting this.

Thanks in advance!

 

[petehall347]

tis here for first one ...http://www2.panasonic.com/consumer-...nics-Audio-DJ/Technics-Receivers/model.SA-AX6

 

[petehall347]

i would email technics here ....http://www.panasonic.co.uk/html/en_GB/Support/Downloads/220239/index.html#anker_222458
trouble maybe technics is Panasonic i am now confused

 

[Ma61]

Thanks Pete.

Anyone else out there that might know this?

 

[SVI2004A]

130 x2 on the G90... If it was mine id retrofit it from svi3206c to SVI3206A

The AX6 is a class H amp and comprable in output. It is more advanced pro logic, but imho id be looking back to the early mid 80s Technics amps (1984-5)

Unless pro logic is needed.... I run the best of both... TX50 as pre and the old school amps driving the speakers.

 

[ReverendFunk]

130 x2 on the G90... If it was mine id retrofit it from svi3206c to SVI3206A

The AX6 is a class H amp and comprable in output. It is more advanced pro logic, but imho id be looking back to the early mid 80s Technics amps (1984-5)

Unless pro logic is needed.... I run the best of both... TX50 as pre and the old school amps driving the speakers.

The build quality of the New Class A amps seemed to go downhill after 1983, if you ask me. I was shocked to find that an SU-V303 I recently acquired had plastic pot shafts on the tone and balance knobs. The button caps are plastic too. By contrast, everything is (or appears to be) metal on the SU-V3 and SU-V7.