• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Railroader Talk

mulester7

LIVE from Lake Ouachita
.....anyone else here been a railroader?....whether it was in transportation or mechanical doesn't matter....got a story to tell?.....
 
Last edited:
Register to hide this ad
Yup...I come from railroading families. On my side, Great GrandDad was an engineer on the C & NW...died in a headon between two steamers back in '36. My Dad worked for the Rock Island for a while, my Great-Uncle was with the Rock Island for quite a few years & then went to work as a federal railroad inspector. On my wife's side, her GrandDad was a Soo engineer, as was her Dad.

I even worked for the Soo (sort of:)) Growing up in a Soo division town meant that most of my buddies had Dads who were Sooliners. Back in the day, the Soo yard was a pretty busy place...probably our town's largest employer. There was a car barn, engine shop with a turntable, the whole nine yards. When we'd get a big snow, the call would go out to the Soo kids to head up the hill...shovels over their shoulders. And of course I'd tag along. In those pre-Bobcat days about the only way to clean out the turntable was an army of kids with grain scoops shovelin' the white stuff. We got paid well...in cash:)

Of course...things have changed. The roundhouse & car barn are long gone, and, with the advent of unit trains & the like you don't hear the crews "bumpin' cars" all day & night any more. But...you still hear the horns:) And...I'm sure muelster knows the correct name for a train horn is a "chime", right? They're all tuned to a chord...usually a minor...and most of the engineers have a unique way of sounding them. I know my late father-in-law did...my wife could always tell when her Daddy was pulling into the yard by his particular technique.
 
While not a true railroader - I just became curator of a large collection of RR related items that came from my uncle and grandfathers collection.

I have nice collection of Adlake and Dressel signal lights. And my grand father had this thing called the "whistle machine" - that included a few train horns and whistles.

I just sold a loco headlight to a fellow up the road. Lots of literature, and a nice collection of RR history books. Lots of signed hardback books by Staufer, Wanberg.

Lot of Nickel Plate Rd stuff too. They lived on the west side of Cleveland in the glory days of steel, big machines, and transportation - the train tracks ran past their neighborhood a few blocks up the street.

I'm about to crack into his collection of video documentaries about RRs.

He was also a big Lionel collector and service guy - manufactured parts, screws, etc for Lionel trains.

So yeah my house is looking a bit like a RR history museum these days!
 
Had a friend into steam power that worked with the Heber Creeper line doing maintainance and resto, he occasionally took a loco out for a trip around the route living the dream.
That's about it.
 
I grew up with railroaders, going back to the first of their kind. My dad was the first to break from that tradition, and became a dentist. Uncles, aunts, grandparents, greats, great-greats,.... I can keep going back to day one.
My dad bought a house in a new middle class suburb neighborhood, a couple of years before I started into school (kindergarten). On one of the first days in school, the teacher asked the kids what their parents did for a living. What I heard was one kid after another who said that their dad was an engineer. Now to me, this was real railroading! I also thought about how could there be so many engineers in such a small area?
I came to find out later that they weren't that kind of engineer.
And the world became that much larger to me that day.
 
I have an old Adlake railroad lantern. Still has the kerosene canister, wick, and chimney.
 
I'm third generation, next April will be my 42nd year, PC / Conrail / Shortline (GVT). My father was NYC / PC / Conrail, Grandfather was Pittsburgh Shawmut and Northern.

I've been in the Management end of biz since '79, currently, Dir - Marketing for the GVT family of short line railroads in NY and Pa.

While both of my sons are engineers, neither can 'blow the horn' ........ both are PE's though........
 
Blount party on #99, Thendara, 5-3-15, Taibi.jpg This past spring we hosted an OCS on our Mohawk Adirondack & Northern to honor my Dad and his career. Pic is of us on the back of the car @ Thendara, NY. My Dad in the middle flanked by my brother and I, 120 years of railroading between the three of us.
 

Attachments

  • Blount party on #99, Thendara, 5-3-15, Taibi.jpg
    Blount party on #99, Thendara, 5-3-15, Taibi.jpg
    107.1 KB · Views: 2
  • Blount party on #99, Thendara, 5-3-15, Taibi.jpg
    Blount party on #99, Thendara, 5-3-15, Taibi.jpg
    107.1 KB · Views: 2
My grandfather was an engineer in Buffalo on the New York Central. Imagine the look on my face, during a visit, the first time I saw a train stop behind his house to pick him up.
 
I worked for a short time as a clerk for the Burlington Northern (pre-BNSF) and the Norfolk Western (now the Norfolk Southern) about 1970. Here's a story my father told me. He worked many years as a switchman.



THE PIG IN THE FIREBOX


My dad told me the following story, from the last days of the steam locomotive. A switch engine crew in the North Kansas City yards of the Burlington (now Burlington Northern Santa Fe, BNSF) was sent over to the old stockyard, since torn down. Arriving there, they found they had no further orders, so as many railroaders (aka, Featherbedders) do, they proceeded to loaf, and inadvertently lost their head of steam. Then, the radio ordered them to get back to the yard, ASAP. Without a head of steam, they were in a bad place, so they began to stuff anything that would burn quickly into the firebox. A stockyard worker suggested they use for fuel a nearby dead pig. They dragged it to the engine, hoisted it up into the cab somehow, and stuffed it into the firebox. In not too much time, the fat of the pig began to render, producing a roaring fire, and up came their new head of steam. Off they went, back to the railyard. What they did not know was that hot, liquid fat was running from the firebox into the ashpan, and shortly, onto the tracks. The burning glops were just occasional at first, but after a while, there was a steady stream of burning fat behind the engine. However, they were making good time, and had a good chance to avoid trouble - but then, the first pop-off valve opened up, and that was a worry. In short order, the second pop-off valve opened up, and then the third. Fearing a boiler explosion, the crew set the engine to vent steam, and abandoned it to a safe distance, the engine spewing smoke, steam and burning fat the whole time, until all the fat was burned up.


That's the story told to me by my father, and he told it as being absolutely true, something that happened in the 1950's.
 
5th year of retirement now, can't believe a 47 year career flew by so quickly ! Looking back, here's where it all began, me on my Dads lap at Tower 'RB' , just south of Bflo, 1955...
 

Attachments

  • drb dads lap.jpg
    drb dads lap.jpg
    272.9 KB · Views: 25
Though I personally never worked in the R industry, several relatives did, mainly for the Union Pacific and the BNSF lines. Here's a "family" RR tale...

In 2013 YOOL I left California for Illinois -- by train as it happens -- to start a then (nb: it's now going on 12 years, lol) new job @ Lake Forest College (LFC). Among the Trustees of The College was (and remains) one Rob Krebs, former CEO of, respectively and in succession, the Southern Pacific RR, the Santa Fe Pacific RR, and finally the Burlington Northern Santa Fe RR, from which he retired.

Now, as it happens, I returned to CA (Santa Barbara) in 2015, but I maintained my position @ LFC, and thus my ties with, among other trustees, Rob Krebs.

During a visit with an uncle in Long Beach (CA), this particular uncle, a "railroad man" for some 40 or more years and also retired, mentioned that he noticed (on the interthing) that Krebs was one of LFC's trustees. He also mentioned that he'd worked closely with Rob for dozens of years as "Krebs's man in Southern California" operations. He implored me to mention my relationship with the next time I was in Lake Forest for any event that might include the trustees of the College.

In 2018 I was back in Illinois and did attend an event @ which, among others, was Rob Krebs. Boldly did I announce to Rob that my uncle, still living in So Cal, asked me to extend to Rob a greeting, which I did. Rob's reply was this: "How is George doing? How's his health? Is he still fat?"

At this I had to laugh, because when, at our luncheon at the Long Beach Yacht Club, my uncle told me about his connection to Krebs and asked me to extend to him a greeting, I also recall him saying something to effect "Rob will probably ask you if I am still fat. If does, tell him I've lost 60 lbs since the last tie he saw me. He'll be pleased."

So, I passed this news on to Rob at the 2018 event, and he replied "Good."

And so concludes my story about the railroad men in my family and one of the United States railway industry's heavyweights, Robert D. Krebs.
 
Road the "rails" way back when. Hated bus travel as a kid.

Nothing beat going through the Canadian Rockies in a glass topped passenger coach. What an experience! o_O

Q

Agreed, I've ridden the 'Canadian' 3 times between Toronto and Vancouver, the dome cars are special ! Anybody thinking about doing so better go quickly for the equipment, mid-50's era Budd built, are nearing the end of its metallurgical life. VIA rail currently has RFB's out for replacements
 
They still run a special train through the rockies if you want the experience:

rocky-mountaineer-host-tells-story-to-guests_0.webp


RM18_RGR_Seton_Train%20Exterior_1.webp



It's not cheap though. MIL took it some years back for the experience and it was around 10-11 grand for the 12 day first class package. Hotels, meals, etc. Everything except the air travel to the train pickup. Like a cruise ship experience.
 
Back
Top Bottom