Bill Ferris
Lunatic Member
You must mean a 3D created plastic push button knob for his switch that he just installed so he doesn`t have to use something like a screwdriver to actuate the switch...
Realistic STA-2500 power button missing issue
- Thread starter Dave N.
- Start date
You must mean a 3D created plastic push button knob for his switch that he just installed so he doesn`t have to use something like a screwdriver to actuate the switch...
Dave N.
Active Member
Hmmmm. Never even entered my mind. I'm 60 so that is nee technology to me. And to all my friends as well. But great idea. I will see if one friend of mine who's an IT person knows anyone. In the meantime I'm going to RIG it. Ha ha
Dave N.
Active Member
Already got that new switch in there. I'm just going to attach something black to it for now. Something that will attach amd reach outside enough so I don't need a screwdriver. .Steampunk it! Just need to do a bit of physical clearance work. Switch will outlast that which is to be switched.
HTHMAN
Super Member
If it was mine, I would take that switch out and replace it with something like this
https://www.amazon.com/dp/B09TRJMP2...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
https://www.amazon.com/dp/B09TRJMP2...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Dave N.
Active Member
I wonder how I would fit in the slot though. Good idea if it fits nicely in the slot. I'm not sure with the dimensions they have. Are they saying millimeters. I can read inches. I'm at work now though.
HTHMAN
Super Member
I am sure it is millimeters. There are roughly 25 mm's in an inch so you can convert or just measure your slot in mm's. If the slot is big enough, could make a neat installation with a little notching.
