• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Rectilinear Model X

Ja101

New Member
I am restoring a pair of Rectilinear model X 3 way. The crossovers are giving me heartburn. The resistor for the tweet ( which I would like to replace) is a color coded 6 band and is coming back as 42.9 M ohms according to all on line calculators. 0.043 ohms, makes no sense because it seems like too small of a value? Also there are two pots (Lpads?),the smaller one is marked 14 ohms for the tweet and the other is a larger variety marked MG 15 for the mid. I would like to replace both but I can't find an exact match. Would a 16 ohm L pad from Parts Express work for the tweet. I don't know how to determine the value of the mid pot.
 
Register to hide this ad
A 14 or 16 ohm pot would work. Difference between the two is power handling for the mids.
My Xa has no resistor, just the two pots. I posted a circuit diagram of my Xa's a few years back (series-connected xover in the Xa, parallel-connected xover of the X model). Ask Parts Express how to connect it.
 
Back
Top Bottom