Rega plinth

[losthorizon]

I have made a custom Rega turntable from upgrade parts over a couple of years, buying parts as I could afford them, I have even made my own plinths, some are big and heavy versions made from solid wood and some are box-framed construction, but I would like to try the newer plinth made by Rega and used on the P6 models and above, so the question is can they be purchased and where from?

 

[Montycat]

Rega is very protective of their distribution channels so I don't think you will easily find parts like that. However there are many aftermarket suppliers for Rega compatible parts so you might find a similar or related plinth, or just make your own. It's not rocket science.

 

[losthorizon]

Rega is very protective of their distribution channels so I don't think you will easily find parts like that. However there are many aftermarket suppliers for Rega compatible parts so you might find a similar or related plinth, or just make your own. It's not rocket science.

Thanks for your comments, I wanted to find out what was so good about these new foam based plinths that Rega have introduced, but I have seen reports of them sagging, and that has put me off them a bit,