Repair Help: Grommes Precision Amplifier G125

[Xavier Ihrig]

I found an old amp at a thrift store in McKenzie, TN that came with two microphone mixers and a feedback controller. When I pulled the amp off the rack, the two capacitors inside had burst. They were the exact same, so I only pictured one. There's a TI-84+ for reference, but I don't remember the dimensions exactly. If anyone has some help on what part I need to get to replace it, it would be of great service! Thank you!

 

[avionic]

, but I don't remember the dimensions exactly.

Its printed on them 23X88 mm.

 

[avionic]

https://www.mouser.com/Passive-Comp...s-Snap-In/_/N-75hr0Z1yzvvqx?P=1z0wrk0Z1yx4atu

If you need to use the old can and restuff it.

 

[Xavier Ihrig]

https://www.mouser.com/Passive-Comp...s-Snap-In/_/N-75hr0Z1yzvvqx?P=1z0wrk0Z1yx4atu

If you need to use the old can and restuff it.

Thank you so much! I replaced it and the amp is working great now. The one that I got didn't have the same diameter, so I just used some double-sided tape to secure it to the bottom.