• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Repairing a potentiometer

joshtdn

New Member
Hi all,

As you can see I did an oopsie on this potentiometer. It is the balance knob for the Akai AM-2250.

I am wondering whether this can be repaired. It seems likely that the pcb material can be glued and the outer two traces soldered back. But I am unsure what the crescent shape on the middle pin is doing.

Any insight would be appreciated.


WhatsApp Image 2026-11-09 at 14.28.05.jpegWhatsApp Image 2026-11-09 at 14.28.06.jpeg


WhatsApp Image 2026-11-09 at 14.28.06(1).jpeg
 
Register to hide this ad
the crescent piece is what makes contact with the moving wiper.

have to concur on looking for a replacement pot. Fixing these things isn't really practical. Can't solder the carbon track, at best you might be able to use conductive paint but I don't know how reliable that is. Balance pots tend to be log/antilog or MN taper, this may be modern and standard enough that you can just buy a new one. All else failing if you can get another of the same brand/style with the right taper and the wrong shaft you may be able to swap the wafers over.
 
It is likely an MN type. Some guitar shops may have something you could use. There is a manufacturer, Taiwan Alpha that is decent. Here are some examples of suppliers that you may look into:
 
Back
Top Bottom