• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Replacing 2SC1903 and 2SA898

slimecity

Super Member
Hi - I need to shotgun some transistors in my Pioneer M22 poweramp. Am having issues with wildly fluctuating DC offset.

I have two pairs of 2SC1903 and 2SA898 on the poweramp board. The recommended replacements for these are KSC3503ESTU and KSA1381ESTU.

The problem I have is matching the gain on the available replacement options - at RS and element 14 I can only find KSC3503DSTU and KSA1381ESTU.

So I cant match the pairs - there dont seem to be any "E" grade KSC3503 that I can use. Due to shipping cost I can only use these 2 suppliers to NZ.

Are there any other options out there, as a matched complementary pair, to replace the 2SC1903 and 2SA898?

thanks!
 
Register to hide this ad
Noticed Mouser does not have the "KSC3503E" and Digikey have it marked as obsolete.
Do you know of a reliable supplier that has the "E", happy to post across the ditch if that helps.
 
Hello

Perfect sub for :

- 2SA898 are : 2SA970 (Toshiba) 2SA1142 ( Nec ) 2SA1110 (Matsushita) 2SA1285 (Mitsubishi) 2SA1482 (Rohm) , I will choose 2SA970 with the same gain class as 898
- 2SC1903 are : 2SC2911 (Sanyo) 2SC2229 (Toshiba) 2SC2682 (Nec) personnally I will choose 2SC2240 with the same gain class as 1903

If you can't find original send me PM
 
The 2SC2229/2SA949 and 2SC2240/2SA970 aren't going to have the dissipation ability as the originals and the 2SC2240/2SA970 can't match the VCE of the originals .

Look for a 2SC3790E. Its the Sanyo 2SC3503E in a full plastic TO-126. I think B+D might still have them.

EDIT: I looked at your location. Try these at futurlec.com. I've bought from them before, and so far they are real:

2SD1609
2SB1109
 
Last edited:
If you got real parts from futurlec you are lucky, I haven't heard good things, and I got some fakes from there when I first started.
 
These seem to cross reference on a Motorola cross reference chart - how about me using new parts MJE350 and MJE340?
 
If you got real parts from futurlec you are lucky, I haven't heard good things, and I got some fakes from there when I first started.

If you are trying to buy parts that are well known, then yes, they probably will be fake. The 2SD1609/2SB1109 are pretty obscure. I'm not sure anyone has bothered to fake them. The ones I've gotten from Futurlec have been real. Although that's always subject to change in the future.

I'd probably start by replacing the input pair (2sa798 I think) and the current source (2sa725) and the zeners. If that didn't do it, then I'd probably use the 2SC3902/2SA1507 or KSC2690A/KSA1220A before resorting to the MJE parts.
 
Last edited:
If you are trying to buy parts that are well known, then yes, they probably will be fake. The 2SD1609/2SB1109 are pretty obscure. I'm not sure anyone has bothered to fake them. The ones I've gotten from Futurlec have been real. Although that's always subject to change in the future.

I'd probably start by replacing the input pair (2sa798 I think) and the current source (2sa725) and the zeners. If that didn't do it, then I'd probably use the 2SC3902/2SA1507 or KSC2690A/KSA1220A before resorting to the MJE parts.

Cheers Mr Fungus.....

I have replaced both input devices (798) with 2 closely hFe matched 992's, the issue was there before that replacement and still remains. I will tackle the 725 next, thanks - pretty sure I can drop in a 992 to replace this I actually have a 2sa970 installed in place of the sometimes problematic 725).

Thanks for the recommendations on the other parts - I will double check that the hFe requirements of those parts will be OK, and also availability to ship to NZ.
 
If the 2SA970 is already in there, then I'm pretty sure the A992 isn't going to improve your situation. Based on your other thread, you've done all the sensible stuff. The downside of a hot running pure class A amp is that after 40 years, anything could be suspect, not just the usual stuff.
 
The downside of a hot running pure class A amp is that after 40 years, anything could be suspect, not just the usual stuff.

Roger that, suspect you may be right. 90% of the semis' in here are original. The last owner did a full recap but left all the semis and the original trimpots in place......

Im going to do a bulk order and shotgun the original transistors in about three separate steps I think - the bigger power regulator transistors will go first. I will go with the KSC2690A/KSA1220A to replace the 2SC1903 and 2SA898.

Thanks a lot Footfungus.
 
Back
Top Bottom