PavloMamonto
New Member
Hello team.
Maybe someone had this issue. When I move arm to "In position" mode my screen turn off. After some investigation I found that there is no 24v.
I tried to check and if disconnect arm connector from arm electronic board 24v comes back. Change completely power supply board and didn’t help. Also change completely motor board also no results.
I am wondering if it is possible faulted solenoid. But I have resistance on solenoid 164.5 Ohms.
Can you advise what to do or how to try to solve it.
Maybe someone had this issue. When I move arm to "In position" mode my screen turn off. After some investigation I found that there is no 24v.
I tried to check and if disconnect arm connector from arm electronic board 24v comes back. Change completely power supply board and didn’t help. Also change completely motor board also no results.
I am wondering if it is possible faulted solenoid. But I have resistance on solenoid 164.5 Ohms.
Can you advise what to do or how to try to solve it.