Hi all.
New here. I buy an SA-9500 with distortion on both channels so I’m planning to recap it but I have two doubts.
1. When I started with the visual comparison noticed that 5 output transistor are original and 3 are different (picture below). What you recommend? I should change the 8 transistor or what? If so which one is the replacement?
2. Was thinking of ordering the parts from this list: http://www.audiokarma.org/forums/index.php?threads/sa-9500-recap.412525/ but this cap 667-ECQ-V1H224JL2 is unavailable. Can I use this? 647-QYX1H224KTP
Thank you!
New here. I buy an SA-9500 with distortion on both channels so I’m planning to recap it but I have two doubts.
1. When I started with the visual comparison noticed that 5 output transistor are original and 3 are different (picture below). What you recommend? I should change the 8 transistor or what? If so which one is the replacement?
2. Was thinking of ordering the parts from this list: http://www.audiokarma.org/forums/index.php?threads/sa-9500-recap.412525/ but this cap 667-ECQ-V1H224JL2 is unavailable. Can I use this? 647-QYX1H224KTP
Thank you!