SA-9500 tantulam caps

[Cosmic Charlie]

Does anyone know if the small value (0.22 @ 35v) tantulam caps on the switch circuit assy board (AWS-082-01) of my Pioneer SA-9500 Integrated amp be replaced with same value electrolytics?. When ordering new caps the service manual parts lists and schem. didn't describe them as tants, just as normal electrolytics, so I have the 0.22 @ 35v electrolytics, When I opened the the amp I noticed the caps where dissimilar, they look like tiny blue gumballs. I am reluctant to install them without knowing the consequence. I would not want to alter the tone or sound output of my amp. Thanks for any advice. CC

 

[EchoWars]

Replace 'em and quit worrying about it. :yes:

 

[Fred Longworth]

Electrolytics are fine. I advise 105 degree devices. If you prefer low-leakage devices, Xicon and others make them.

Fred

 

[Cosmic Charlie]

Thanks guys, changed out the dif pairs in the amp section, thought while I had it open I would finish the recap, and rebuild the protectiob
n circuit. CC