• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Sansui 881 - Where is the fuse for the lights?

C

chaisu

New Member
All but one of my lights was working. I swapped the non-working bulb with one of the working bulbs to test it out, now none of the bulbs are working (except the FM STEREO light).

Can someone kindly direct me toward the fuse for the lights? I was thinking it was F04 but it seems to be okay. I also wiggled around the wires at the back of the light enclosure thing without success.

How did I manage to make all the lights go dark by swapping two of the same bulbs?
 
Register to hide this ad
chaisu said:
All but one of my lights was working. I swapped the non-working bulb with one of the working bulbs to test it out, now none of the bulbs are working (except the FM STEREO light).

Can someone kindly direct me toward the fuse for the lights? I was thinking it was F04 but it seems to be okay. I also wiggled around the wires at the back of the light enclosure thing without success.

How did I manage to make all the lights go dark by swapping two of the same bulbs?
Click to expand...
F01. Says right in the schematic. But wouldn't you notice a blow fuse anyways? I think something else is going on.
 
ivandezande said:
F01. Says right in the schematic. But wouldn't you notice a blow fuse anyways? I think something else is going on.
Click to expand...

Thanks! That's the one. There were no burn marks and it was too dusty to see that it was blown until I pulled it out.

And for my own education, where in the schematic would I find that? I was looking on page 22 of the service manual in the power board section, but I admittedly don't fully understand how to read the schematics.
 
chaisu said:
Thanks! That's the one. There were no burn marks and it was too dusty to see that it was blown until I pulled it out.

And for my own education, where in the schematic would I find that? I was looking on page 22 of the service manual in the power board section, but I admittedly don't fully understand how to read the schematics.
Click to expand...
I found where the lights were in the schematic, which were connected to points B3/4, then looked on the power supply section for them.

Check your wiring.
 
You must log in or register to reply here.
Back
Top Bottom