• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Sansui 9090 pops when using selector switch

nodols

Active Member
Got this Sansui 9090 which pops everytime I use or switches to any of the selector switch options.
AM, FM, Aux, Phono ,etc. Each time I use the selector it gives a pop.

Anybody ever had this issue, and where to start looking?
 
Register to hide this ad
Anybody ever had this issue, and where to start looking?
Sometimes caused by dirty (oxidised) switch contacts, or leaky capacitors which couple stages that the switch connects when operated.

IIRC it is difficult to clean those switch contacts - do a search for 9090 switch cleaning and see how others have done it.
 
Sometimes caused by dirty (oxidised) switch contacts, or leaky capacitors which couple stages that the switch connects when operated.

IIRC it is difficult to clean those switch contacts - do a search for 9090 switch cleaning and see how others have done it.
The amps sounds amazing just the selector when switching inputs.

I’ll try cleaning the pots first. Maybe do some measurement on the caps too.

Just don’t have the energy to open it up for now. After a few weeks struggle with that Dynaco restoration.
 
Back
Top Bottom