Sansui AU-222 advice please

[ZanzibarMDS]

The specs on the bulb are
Stanley
8v
0.15A
AT

 

[olegau]

Put LED color you like

LED Basics: Gaining an understanding of how to work with 3 and 5mm LEDs

Let’s take a look at How to work with 3mm LEDs and 5mm LEDs and which is best one 3mm or 5mm? 5mm LEDs are super affordable and easy to work out.

www.theledlight.com

 

[ZanzibarMDS]

Hey Oleg, thanks for sending that link. It explains everything you need to work out what size resistor etc for a given voltage and LED type.

 

[olegau]

Hey Oleg, thanks for sending that link. It explains everything you need to work out what size resistor etc for a given voltage and LED type.

The light is 6.3V AC. Do not forget to put a bridge rectifier to get DC voltage. Measure the DC voltage and then calculate the resistor volume. Any bridge rectifier and resistor suit because small voltage approximately 8V DC and small current approximately 0.02A .

 

[ZanzibarMDS]

The light is 6.3V AC. Do not forget to put a bridge rectifier to get DC voltage. Measure the DC voltage and then calculate the resistor volume. Any bridge rectifier and resistor suit because small voltage approximately 8V DC and small current approximately 0.02A .

Great, thanks Oleg