• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Sansui AU-X1 caps

drmike

New Member
Hello to all Sansui Lovers from Paris!

I write to you from France and hope you'll excuse my poor English....
I have just restored a second nice Sansui AU-X1 I bought in Japan (Yahoo)
The whole Amplifier has been disassembled, cleaned,deoxydized ; a lot of poor soldering repaired ; I changed the original torroidal transformer (100v) for a new (and bigger) one (220V) isolated in a copper case
It sounds really wonderfull ! (Dynaudio Speakers, Jolida 100S Player)
Now my question concerns capacitors : some people say if there is no leak or if they are not distended don't change them ; other say that lifetime of electrolytic capacitors don't exceed ten years....
Do I really have to change them? in that case which capacitors on which circuit? For the same ones, or for other better ones off same value?
Thanks to everybody and best gratings from Paris!
 

Attachments

  • AU-X1.JPG
    AU-X1.JPG
    56.7 KB · Views: 89
Register to hide this ad
Nice work!

I prefer to change all the electrolytic capacitors in gear from the 70's (sometimes the mylar and socalled 'black flag' capacitors as well). I try to use low-ESR high temperature caps. The Panasonic FC and FM lines suit this need very well. For signal path capacitors I have been trying out different brands - Nichicon Muse, Elna Silmic, etc. I haven't settled on a 'favorite' yet (in fact I am not sure I can hear a difference because I have not done direct A/B testing of the two).

If you have the caps and time you can make the unit last for another 30 years hopefully. If it is too much of a pain for you then just listen to the amp until it starts to develop problems, then unplug it and take it to someone to repair :)

Welcome to AK!
 
Hello to all Sansui Lovers from Paris!

I write to you from France and hope you'll excuse my poor English....
I have just restored a second nice Sansui AU-X1 I bought in Japan (Yahoo)
The whole Amplifier has been disassembled, cleaned,deoxydized ; a lot of poor soldering repaired ; I changed the original torroidal transformer (100v) for a new (and bigger) one (220V) isolated in a copper case
It sounds really wonderfull ! (Dynaudio Speakers, Jolida 100S Player)
Now my question concerns capacitors : some people say if there is no leak or if they are not distended don't change them ; other say that lifetime of electrolytic capacitors don't exceed ten years....
Do I really have to change them? in that case which capacitors on which circuit? For the same ones, or for other better ones off same value?
Thanks to everybody and best gratings from Paris!

I am currently changing the main filter caps in my Sansui B-2101. There are four 10000uF 95V Hitacon (Hitachi) caps, some of which are leaking. Even with a simple Rx1 analog multimeter kick check you can see that the old caps have lost their capacity compared to the new caps.

This is a later amp than yours and the caps only have a limited life time so I suggest you look for replacements such as Panasonic or Nichicon Gold etc.
 
thanks to all for your answers,
I think I'm going to change all electrolytic capacitors (except the eight big ones of 10000 microfarad value of wich seems to be OK)
I'll take the necessary time, this amplifier is worth trouble...
I still have a Sansui AU Alpha 607 L Extra, AU 919 limited edition (copper chassis) and AUX 901 but the AUX 1 exceed all those models
greetings
 
What a great collection you have there! :music:

Yes we all like pics here on audiokarma!

The AU-X1 has a few things your others don't have; separate transformer for the preamp, 6 output transistors per channel instead of four, and 400 000 Hz bandwidth, high slew rate.

Seems counterintuitive that the largest and most obvious main filter caps make the least difference in the sound...but they do.

You upgraded the transformer in the preamp section?
 
Last edited:
When I changed the AUX-1 from 100 to 220v, I only changed the toroidal transformer and had it made on order by Audiophonics (www.audiophonics.fr) for about 100 Euros
650VA ; primary voltage 220v ; three secondary voltages : 48v-0v-48v ; 48v-0v-48v ; 0v-100v
By this way, the toroidal transformer gives the current to the main amplifier section and to the preamplifier transformer who has not been changed ; it works very well!..
What about the AU 919, the Japan version is called AU-D907 LIMITED (you can find the pictures on SANSUI.US)
If I decide to change the eight big caps (10000 microfarad, 100v) of the AUX-1, does anybody know where I can find them or which caps I must purchase?
Thanks to everybody and ones again sorry for my English...
 
Like the Nichicon Muse but only KG and KZ series not below these two.
as Rubicon ZA and ZL is doing very nice. If had the money place some Bl.Gates at vital points on the circuitboards.

All the old Elna's (grey, black, blue, orange) lose capacity and sound becomes softer and has less transients.
Have changed all ceramic capacitors as well to silver mica and the result is very positieve . Grain is gone. I leave not one old ceramic in. Think twice about the multilayers of 1000V. Not so for audio.

Test yourself: f.e. a B.Gate/Muse Panas. 16v is best sounding. Appreciate 16v B Gate.
Green mylars = mkt replace with Mks/Mkp or pio or one of both. Mks does very nice as well.

What and how is important as well.
Replace in steps as a member here suggested works best f.e. first driverboard caps after a week preampl. board. a.s.o.
 
Last edited:
Does anybody know where I can find those big caps (online sale) for a good price
(10000 microfarad, 100v) in the same or better quality than the original Elna caps ?
thanks
 
Back
Top Bottom