Sansui TU-317 lights

[Satch]

Just found a Sansui TU-317 at the thrift store for 9 euro's (around 13 dollars), so I had to had it. Front looks good, some small scratches on top and the feet are missing, but that's no problem.

Unfortunately, the lights of the frequency scale and the signal meter are dead. But.... a friend of mine has these lamps and he'll even put them in for me. The question now is: how much lamps should there be on the frequency scale? There are 3 holes (see pic), but only two lamps. Looking at the wiring, I suspect there should be only two lights and the third hole was meant for another (higher?) model. But can someone confirm this?

 

[Stene]

Schematic says two

 

[Satch]

Thanks!

 

[Valsimot]

Drool... 9€?!? Lucky!!!

 

[Satch]

Had the Sansui fixed today. Bulbs were replaced, feet fitted and some Elna caps were replaced. Connected it to some wires and I'm listening to the Sansui right now. Pretty good actually, and I really dig the looks:

 

[Kari]

Just found a Sansui TU-317 at the thrift store for 9 euro's (around 13 dollars), so I had to had it. Front looks good, some small scratches on top and the feet are missing, but that's no problem.

Unfortunately, the lights of the frequency scale and the signal meter are dead. But.... a friend of mine has these lamps and he'll even put them in for me. The question now is: how much lamps should there be on the frequency scale? There are 3 holes (see pic), but only two lamps. Looking at the wiring, I suspect there should be only two lights and the third hole was meant for another (higher?) model. But can someone confirm this?

Hi. I wonder what kind of bulbs was it? I need to change bulb in my tuners to.