Schiit Output to Powered Speakers: Which Cable/Converter?

[reverend13]

I have a Schitt Valhalla 2 that has RCA's for outputs to external speakers. I have two powered speakers/monitors that I would like to use on occasion, instead of using headphones all the time. I assume that the L RCA output would run to one powered speaker and the other R RCA to the other powered speaker. The inputs on the powered speaker are single TRS cable.

As a result, is there a cable that would go from a single RCA output connection to TRS, or do I have get a converter/adaptor?

Thanks in advance!

 

[whoaru99]

The TRS input implies a balanced connection but you are implying to feed them unbalanced signal.

To do that get a couple RCA > TS adapters (or RCA > TS cables if you prefer). Yes, I said and meant TS.

 

[reverend13]

The TRS input implies a balanced connection but you are implying to feed them unbalanced signal.

To do that get a couple RCA > TS adapters (or RCA > TS cables if you prefer). Yes, I said and meant TS.

Thanks. I bought RCA to TRS cable but was not what I thought it was, especially when it had a pair of RCA's into one TRS, thereby only one speaker taking up the outputs.

 

[whoaru99]

Yup, no need for any sort of splitter/"Y" cable. Just a single RCA > TS connection to each speaker.