• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Sea Foam users?

^^Sure, before it completely erodes your paint.

I've been using seafoam for years with great success. I typically see a small increase in fuel economy and throttle response. Smoother idle, too.
DOT 5 is silicone based so it may not eat paint like DOT 3 and 4
 
I had 4 banger MX-6, loved that thing, but the only thing Sea Foam could do, if anything, is clean out the carbon, and with that many miles your valve stem seals and seats are most likely shot and in need of overhaul.

Totally agree, I know just enough about engine internals to be dangerous but they must be wallered out pretty good by now. And 90% of its miles are highway commuting at 65-75, so maybe the cylinders are not carboned up much. I hoped that maybe oil consumption was from stuck rings which I've also heard can be freed up with The Treatment, but that's a carbon issue too I gather. So maybe this wouldn't do much for the old MX-6. The rings are probably worn within a micron of their lives.

I did fire it up on Sunday (it was 70 in Jan so I took the opportunity to do some car chores, including vacuuming this one to get it ready for sale. Started right up and ran smooth (you can never tell when it's going to do the bucket of bolts sound after sitting for awhile). I think I'll drive it to work every week just to keep it lubed up. I kinda miss it anyway. The Civic is so...well behaved, everything in its place, conservative, safe, boring. :(
 
Installing an oil separator will also do wonders in keeping gunk out of your throttle body and engine. JLT sells one. Runs a little over $100
 
Back
Top Bottom