• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

SME spindle to pivot

phastrone

Active Member
I've installed an SME 3009 Series II Improved (detachable head shell) arm on my TT and I'm seeing conflicting figures on the web for spindle to pivot distance
On response from the Vinyl Engine forum was:
II imp early 215.3 mm (Stevenson alignment)
II imp later 213.25 mm (Baerwald)

Another was: 221.8 mm

????:dunno:

Any advice/clarification?
 
Register to hide this ad
The 221.8 figure isn't correct for the Improved series.

Using 215.3 for my Improved non-removable headshell, on my Thorens TD-160. Like the cartridge to track it's best with the inner grooves (Stevenson).
 
the alignment of the SME arms Moves the Spindle to locate the nail exactly where it should be. So the pivot to spindle distance is variable based on using the SME mount and sliding the tonearm to align. Now as to the correct p to s distance, that is particular to the alignment you have selected to use.
In your example, you post two different alignments and have two different p-t distances as would be expected.

Using the SME supplied alignment gauge will provide the alignment that SME decided to use for that gauge. You can use any alignment you want if done properly.

https://www.vinylengine.com/tools.shtml
Dive into the Tools section and start doing a little light reading to learn some differences and such. The SME arm is very versatile and can be used any number of ways.
 
the alignment of the SME arms Moves the Spindle to locate the nail exactly where it should be. So the pivot to spindle distance is variable based on using the SME mount and sliding the tonearm to align. Now as to the correct p to s distance, that is particular to the alignment you have selected to use.
In your example, you post two different alignments and have two different p-t distances as would be expected.

https://www.vinylengine.com/tools.shtml
Dive into the Tools section and start doing a little light reading to learn some differences and such. The SME arm is very versatile and can be used any number of ways.


I should have said that I'm not using the SME head shell...I'd rather use a head shell with the ability to move the cart in the head shell for effective length/overhang/alignment adjustments rather than sliding the arm every time I switch carts. I do have a Dr. Feickert protractor to use, so I'll be able to choose either alignment method. That's why I'm seeking the correct starting point...Which I think would be spindle to pivot...
 
the alignment of the SME arms Moves the Spindle to locate the nail exactly where it should be. So the pivot to spindle distance is variable based on using the SME mount and sliding the tonearm to align. Now as to the correct p to s distance, that is particular to the alignment you have selected to use.
In your example, you post two different alignments and have two different p-t distances as would be expected.

Using the SME supplied alignment gauge will provide the alignment that SME decided to use for that gauge. You can use any alignment you want if done properly.

https://www.vinylengine.com/tools.shtml
Dive into the Tools section and start doing a little light reading to learn some differences and such. The SME arm is very versatile and can be used any number of ways.

I'll bookmark that Vinyl Engine page...It looks like I've got some "light" reading to do...I'm only 73, so...If I apply myself I just may achieve understanding before I shuffle off...
 
With the double flexibility of base or cartridge movement you have extra options. Using a longer p-s distance will mean you need to set the cartridge further forward than the SME shell will allow but provide very slightly more accurate tracking. This is why the longer tonearms are desirable offering less tracking error.

Without diving into all this, I would set your p-s distance such the the chosen alignment provides a bit of adjustability of the cartridge in the shell, not requiring full forward or fully back positioning. And that changes based on which alignment you choose.
 
Back
Top Bottom