First post here.
I'm not super familiar with cassette decks, but I have a pretty good idea of how to fix electronics.
I've looked around everywhere and can't seem to find anything on the belt routing for this guy.
I opened everything up and the belts were just disintegrated so I'm not sure how they get routed. There's a marking on the opposite side in plastic that says N-27.
The yellow highlighted in the image below is how I think it goes, but the bottom metal pulley and the top right pulley have 2 grooves for belts, while the motor only has one. So I'm wondering if I need to have another belt added on somewhere.
https://imgur.com/a/8994cL7
I have a grab bag of random lengths of belts, but bonus points if anyone knows the proper length I'm supposed to have.
Thank you so much in advance.
I'm not super familiar with cassette decks, but I have a pretty good idea of how to fix electronics.
I've looked around everywhere and can't seem to find anything on the belt routing for this guy.
I opened everything up and the belts were just disintegrated so I'm not sure how they get routed. There's a marking on the opposite side in plastic that says N-27.
The yellow highlighted in the image below is how I think it goes, but the bottom metal pulley and the top right pulley have 2 grooves for belts, while the motor only has one. So I'm wondering if I need to have another belt added on somewhere.
https://imgur.com/a/8994cL7
I have a grab bag of random lengths of belts, but bonus points if anyone knows the proper length I'm supposed to have.
Thank you so much in advance.