scottyh777
Super Member
Here is a Sony TTS-8000 DD Turntable I purchased along with the Plinth from a man in Japan
at a great price.The shipping was very high but still came out ok as far as total cost goes.
It was extremely well packed and made it to the USA without issues.Next issue was to purchase
a 100 V step up/down transformer.I purchased one on Amazon cheaply.Next was the arm.The guy I
purchased it from stated that a micro seiki 505 was previously installed.I looked for a used one but the cost
for one in excellent condition seemed very high in the $500-1100 range.Instead I purchased a
Rega RB300 with upgraded RB700 cables.It dropped in no problem and the distance was fine but I needed
about 6MM more of hieght.Quick google came up with Rega product called spacers.I ordered 3 2MM
of these and it gave the height I needed.I attached a Shure Ultra 500 Cartridge to finish it off.
The Plinth is a massive 23X18 in size.I am not sure who the maker of the Plinth is.Whoever owned this somehow
managed to install some AUDIO TECHNICA AT 605 Audio Insulator feet.They are actually attached and im also able
to level the TT.Very cool.Not shown in the pictures is a Pioneer Dust Cover fully covers the TT
and has hinges in the back.So, there you have it my Sony TTS-8000 project is complete except for a little
more tweaking this weekend.It really sounds superb.
at a great price.The shipping was very high but still came out ok as far as total cost goes.
It was extremely well packed and made it to the USA without issues.Next issue was to purchase
a 100 V step up/down transformer.I purchased one on Amazon cheaply.Next was the arm.The guy I
purchased it from stated that a micro seiki 505 was previously installed.I looked for a used one but the cost
for one in excellent condition seemed very high in the $500-1100 range.Instead I purchased a
Rega RB300 with upgraded RB700 cables.It dropped in no problem and the distance was fine but I needed
about 6MM more of hieght.Quick google came up with Rega product called spacers.I ordered 3 2MM
of these and it gave the height I needed.I attached a Shure Ultra 500 Cartridge to finish it off.
The Plinth is a massive 23X18 in size.I am not sure who the maker of the Plinth is.Whoever owned this somehow
managed to install some AUDIO TECHNICA AT 605 Audio Insulator feet.They are actually attached and im also able
to level the TT.Very cool.Not shown in the pictures is a Pioneer Dust Cover fully covers the TT
and has hinges in the back.So, there you have it my Sony TTS-8000 project is complete except for a little
more tweaking this weekend.It really sounds superb.