Source for new 250-ohm Hum Potentiometers for MC60, etc

[EastPoint]

I can't seem to find these anywhere. I see a lot of 250k pots, but nothing for 250 ohm linear. I was hoping Mouser, Tubesandmore, someone like that would have one. Does anyone have a suggestion?

 

[clinic-audio]

Why to replace them ? They are bad ?

 

[EastPoint]

Someone else asked me if I knew of subs, so I figured I'd ask on AK.

 

[gadget73]

not sure what the original looks like exactly but would this work?

https://www.mouser.com/en/ProductDetail/CTS-Electronic-Components/026TB32R251B1B1?qs=sGAEpiMZZMtC25l1F4XBU3qzdd7pwXpPErJ2FpPinR4%3D

 

[Bill Ferris]

not sure what the original looks like exactly but would this work?

https://www.mouser.com/en/ProductDetail/CTS-Electronic-Components/026TB32R251B1B1?qs=sGAEpiMZZMtC25l1F4XBU3qzdd7pwXpPErJ2FpPinR4%3D

Looks to me the same size, style and shaft length as installed in my Mc. 30ties & 60.
Of all of these series Mc. mono block tube amps that have ever passed across my benches, none have ever needed the hum pot replaced.