• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Speed adjust on TD124

cspyon

AK Subscriber
Subscriber
Hi
Do you check and adjust the speed whenever you turn on Thorens TD124? Or how often do you adjust it? Mine is in good working condition with SME tonearm, coming up to speed quickly and running quiet. But the stroboscopic pattern seems to need a bit of adjusting for constant speed whenever I turn it on back sometime after switching off.
How about yours?
 
Last edited:
Register to hide this ad
Due to the induction motor heat up stabilization period, it was never meant to be turned on/off frequently. It requires some time to stabilize from a cold start. Give it 20 minutes, adjust the speed once, and let it be. Stay cool when it starts cold again and don't be tempted to adjust the speed again. It will stabilize once hot enough.

How about yours?
Mine takes roughly 20 minutes to stabilize. I use it on weekends for critical listening. It stays on all weekend, sometime all week. That's what the clutch is for.
 
Thanks for your feedback.
I usually adjust the speed before I put on the record. That's what the operating manual says.
But as you said, it takes some time for the speed to stabilize. But I wonder if I have to check the speed after 20 minutes to adjust again...
Screenshot_20221211-130838_Chrome.jpg
 
Last edited:
But I wonder if I have to check the speed after 20 minutes to adjust again...
You're gonna see a distinct and clear difference on the strobe with a cold start vs. after 20 minutes, and that's guaranteed. You're very likely to be able to hear it too. You're also gonna see a difference due to stylus drag with the tonearm up vs. tonearm down, but unless you're trained for it, you won't hear it. The manual, IMO, is getting a tad anal about speed control. I can't argue with them, but I don't adjust the speed before playing every record. In fact, I hardly ever touch the eddy current break adjustment knob. Once the TD-124 had warmed up, it keeps its speed, so I don't have to.
 
You're gonna see a distinct and clear difference on the strobe with a cold start vs. after 20 minutes, and that's guaranteed. You're very likely to be able to hear it too. You're also gonna see a difference due to stylus drag with the tonearm up vs. tonearm down, but unless you're trained for it, you won't hear it. The manual, IMO, is getting a tad anal about speed control. I can't argue with them, but I don't adjust the speed before every record. Once the TD-124 had warmed up, it keeps its speed, so I don't have to.
Alright, thanks. More mellow sound, I think. Like you said, the speed has stabilized in about 10 minutes after the cold start. Given its original condition, this unit comes up to speed quickly and runs very quiet.
 
Last edited:
You're also gonna see a difference due to stylus drag with the tonearm up vs. tonearm down, but unless you're trained for it, you won't hear it.
That came out wrong. Obviously you won't hear anything with the tonearm up. I meant the speed difference due to stylus drag is generally inaudible. Set up the speed with the tonearm down, and when it cues up, you'll be able to see a strobe fluctuation. Don't sweat it.
 
If you adjust it once, once it is warmed up, you will find that the next time it is turned on, after waiting 20-30 minutes it will be exactly on speed. I usually don't listen too critically for the first side I play after switching it on.
 
If you adjust it once, once it is warmed up, you will find that the next time it is turned on, after waiting 20-30 minutes it will be exactly on speed. I usually don't listen too critically for the first side I play after switching it on.
Strange thing is I have to adjust it a bit again after I turning the speed selector knob to 45 and 78, then back to 33rpm. I think I have to get adjusted to doing it right.
 
You're pushing it. Changing speeds means the idler wheel carriage rises and drops, the idler wheel hitting the stepped pulley in slightly different locations, the mechanical vibrations causes the belt to slightly change its grip on the curved pulley in a different location, and so on. Unless all bearings, bushings, washers and wheel are brand new replacements, and up to snuff, your strobe is likely to show a true speed difference - because the speed truly did change.
 
You're pushing it. Changing speeds means the idler wheel carriage rises and drops, the idler wheel hitting the stepped pulley in slightly different locations, the mechanical vibrations causes the belt to slightly change its grip on the curved pulley in a different location, and so on. Unless all bearings, bushings, washers and wheel are brand new replacements, and up to snuff, your strobe is likely to show a true speed difference - because the speed truly did change.
Oh, I received the unit from the seller yesterday, so I just wanted to test the speed at different rpms. Good point. Anyway I hardly play 45 or 78rpm records. Thanks.
 
Last edited:
If you adjust it once, once it is warmed up, you will find that the next time it is turned on, after waiting 20-30 minutes it will be exactly on speed. I usually don't listen too critically for the first side I play after switching it on.
Just confirmd it. Speed stabilized in about 10 minutes. Many thanks for your good point.
 
Last edited:
It also takes about the same time for my TD 125 to stabilize. My previous TD 124 MK II and TD 121 did the same thing. I'd recommend lubing your motor every couple of years, too. Pull the bottom cover of the shaft well and remove the old lubricant flip over the thrust pad and re-lube. But of course with todays modern synthetic lubes you can probably extend the intervals. You never have to re-lube a 125 motor because it turns so slowly, says the manual.
 
It also takes about the same time for my TD 125 to stabilize. My previous TD 124 MK II and TD 121 did the same thing. I'd recommend lubing your motor every couple of years, too. Pull the bottom cover of the shaft well and remove the old lubricant flip over the thrust pad and re-lube. But of course with todays modern synthetic lubes you can probably extend the intervals. You never have to re-lube a 125 motor because it turns so slowly, says the manual.
It works fine. No need to lubricate the motor at this point.
 
It also takes about the same time for my TD 125 to stabilize.
That's because your 125 is in shambles. The temp-co lamp is about to die out, the trimmers had out lived their life expectancy, the pitch control resistor slide is full of dust, you probably haven't changed the belt in years, your pulley is covered in gunk and your op-amps and supporting RC networks are some sad left-overs from the 1970's and the Wien bridge is out of balance. Hand it over to someone who has a clue. It's a totally different beast than the 124 and if that takes 10 minutes to stabilize it's a wreck.
 
That's because your 125 is in shambles. The temp-co lamp is about to die out, the trimmers had out lived their life expectancy, the pitch control resistor slide is full of dust, you probably haven't changed the belt in years, your pulley is covered in gunk and your op-amps and supporting RC networks are some sad left-overs from the 1970's and the Wien bridge is out of balance. Hand it over to someone who has a clue. It's a totally different beast than the 124 and if that takes 10 minutes to stabilize it's a wreck.

Wow. Tell us how you really feel, why don't you?
 
Has anyone tried to add an electrical heater to the motor to help it reach optimal operating temperature faster?
 
Back
Top Bottom