Gobstopper
Active Member
Hello Everyone,
I've read several times that the trim and bias pots are prone to failure in the x3x series. I'm finishing up a BOM and wanted to add the trim/bias pots to the list, but after a lot of searching I can't seem to find any part numbers
for the replacements. Does anyone happen to have those on hand? I was also wondering if the
647-LKG1H822MESCBK (8200uf/50V) would serve as a replacement for the main filter caps(8000uf/50V) or if different caps were recommended. The recap lists for the sx-838 didn't seem to include the filter caps.
Thanks,
Gabe
I've read several times that the trim and bias pots are prone to failure in the x3x series. I'm finishing up a BOM and wanted to add the trim/bias pots to the list, but after a lot of searching I can't seem to find any part numbers
for the replacements. Does anyone happen to have those on hand? I was also wondering if the
647-LKG1H822MESCBK (8200uf/50V) would serve as a replacement for the main filter caps(8000uf/50V) or if different caps were recommended. The recap lists for the sx-838 didn't seem to include the filter caps.
Thanks,
Gabe
