T/S parameters for JBL D130?

[Vatron]

Hello,

I did a search here for the D130 T/S paramters and came up with very little.
I was wondering if anyone here have taken measurements from their D130 that they would share?

I have seen measurements of many JBL drivers that have a wide difference between them. I am not sure that I should trust most of the measurements that I have seen on the net.

Also, there are measurements here of the D123 compliments of Spkrman57, some of his comments indicate that ALL of the JBL D123 drivers that are marked 16 ohms, are in fact 8 ohm drivers.

Does this apply to the D130 as well?

Thanks

NW

 

[Zilch]

http://www.jblproservice.com/pdf/Thiele Small Parameters/Theile Parameters.pdf

D130's in the box modeling databases. Download free WinISD, for example.

I hit "Calc All" in BB6P to produce the result below.

I believe they're all 8 Ohms, but you can check that out over on the Lansing Heritage Forum using "Search."

 

[Vatron]

Thanks Zilch for the information.

Very helpful

NW