Techflex diameter for Mogami W2528 Wire

[ignis-fatuus]

So I'm servicing four turntables (Some I'll keep, the others I'll likely sell when I'm bored of them). If interested, they are as follows: Technics SL-3300, Pioneer PL-400, Philips GA-212, and Realistic Lab 400. Most of the wires come out of the turntables really need to be replaced. I have been reading through some threads and I feel that using Mogami W2528 wire is a decent way to go that won't break the bank I was thinking about using some techflex for cable management but I'm not entirely sure what diameter to go with--I'm guessing somewhere between 1/4" and 1/2".

If anyone has any advice it would be most appreciated.

 

[peterp1]

W2528 specs and dimensions available here -> https://www.performanceaudio.com/mogami-w2528-dual-unbalanced-cable-by-the-foot.html

 

[darrelb]

i have been using mogami w 2965 twin cable, and it looks like factory cabling and at about
17pf per foot it has some what capacitance than the w2528.
i really like this cabling, i am using this cable on both my harman kardon st7 tables.

 

[whoaru99]

I was as well going to suggest looking at W2965 or the single variant W2964. W2964 is what I've been using for some homebrew cables as of late.

Appears to be a little bigger diameter than W2528, but it is still fairly small and quite supple.

 

[ignis-fatuus]

I'll have to keep the W2965 in mind for next time. I already ordered some W2528 and will see how it goes. I did finally figure out that 1/4" techflex is the way to go fo W2528 wire... Maybe it will be of some use to someone other than myself in the future.