• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Technics SA-700 Toggle Switch Repair

sruchris

Well-Known Member
I have a Technics SA-700 that has loose Tape Monitor switch. After taking the switch apart, I found that the plastic detent that sits on the back of the lever is broken. I tried to glue it back together, but the surface area is too small and it came apart again. Has anyone encountered this problem before?
 
Last edited:
Register to hide this ad
I think they used the same switch in all the models? You could find a sa-200 or 300 for peanuts I would think
 
Here's a list I just now complied of switches used in the SA line:

ModelTape
Monitor 1
Tape
Monitor 2
Record
Mode
SelectorLoudnessFM
Muting
AF
Muting
ToneModeLow
Filter
High
Filter
Power
SA-200SSL121N/AN/AERSM164F25ESSL123SSL123N/AN/AN/AN/AN/AESL21191 ?
SA-300SSL121SSL125N/AESRM164F25ESSL123SSL123N/AN/AN/AN/ASSL123SSL81
SA-400SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL123SSL123SSL81
SA-500SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL119SSL119ESL21191 ?
SA-600SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL119SSL119SSL81
SA-700SSL95N/ASSL95ESRM164F25ASSL97SSL97N/AN/ASSL99SSL93SSL93SSL103
SA-800SSL95N/ASSL95ESRM164F25ASSL97SSL97SSL97SSL97SSL99SSL93SSL93SSL81
SA-1000????????????
 
Here's a list I just now complied of switches used in the SA line:

ModelTape
Monitor 1
Tape
Monitor 2
Record
Mode
SelectorLoudnessFM
Muting
AF
Muting
ToneModeLow
Filter
High
Filter
Power
SA-200SSL121N/AN/AERSM164F25ESSL123SSL123N/AN/AN/AN/AN/AESL21191 ?
SA-300SSL121SSL125N/AESRM164F25ESSL123SSL123N/AN/AN/AN/ASSL123SSL81
SA-400SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL123SSL123SSL81
SA-500SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL119SSL119ESL21191 ?
SA-600SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL119SSL119SSL81
SA-700SSL95N/ASSL95ESRM164F25ASSL97SSL97N/AN/ASSL99SSL93SSL93SSL103
SA-800SSL95N/ASSL95ESRM164F25ASSL97SSL97SSL97SSL97SSL99SSL93SSL93SSL81
SA-1000????????????
Ah. Nice work. Too bad the cheap units won't work.
 
Here's a list I just now complied of switches used in the SA line:

ModelTape
Monitor 1
Tape
Monitor 2
Record
Mode
SelectorLoudnessFM
Muting
AF
Muting
ToneModeLow
Filter
High
Filter
Power
SA-200SSL121N/AN/AERSM164F25ESSL123SSL123N/AN/AN/AN/AN/AESL21191 ?
SA-300SSL121SSL125N/AESRM164F25ESSL123SSL123N/AN/AN/AN/ASSL123SSL81
SA-400SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL123SSL123SSL81
SA-500SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL119SSL119ESL21191 ?
SA-600SSL117N/ASSL115ESRM164F25ESSL123SSL123N/AN/AN/ASSL119SSL119SSL81
SA-700SSL95N/ASSL95ESRM164F25ASSL97SSL97N/AN/ASSL99SSL93SSL93SSL103
SA-800SSL95N/ASSL95ESRM164F25ASSL97SSL97SSL97SSL97SSL99SSL93SSL93SSL81
SA-1000????????????
bummer. i've got an sa505 parts unit but it uses an ssl157 for tape monitor.
 
It took a few tries on the 3d printer, but I think I replicated the plastic detent close enough. Now, I need to figure out how to fasten the switch case to keep it closed.
 

Attachments

  • 5AF5203E-8B1F-46F0-B1CF-1801E70D3ACB.jpeg
    5AF5203E-8B1F-46F0-B1CF-1801E70D3ACB.jpeg
    212.4 KB · Views: 32
I have a Technics SA-700 that has loose Tape Monitor switch. After taking the switch apart, I found that the plastic detent that sits on the back of the lever is broken. I tried to glue it back together, but the surface area is too small and it came apart again. Has anyone encountered this problem before?
I have the same problem. Can you tell me how many pins were on that SSL95 switch? Thanks! Your 3D printer work is a great idea. Did you get it working? Would you consider selling me one of those detents if I get that far?
 
I have SA-800 that the SS-L95 goes in and out periodically....cleaning usually restores function for a couple months....any advice before i try to rebuild....hard to find a donor....
 
Back
Top Bottom