Technics SU-V8 phonostage ?

[Synchro-bias]

:thmbsp:
I have Technics SU-V8X, ive recently rewired the input wires(changed them with high quality solid core copper), and depending on the vinyl it can be quite at volume 2 then just a nudge over on some vinyl its full sound

I am asking V8 owners what the phono stage is like on their amps or anyone with experience with this amps phono.

My cart is a Nagaoka MP11 with a high ouput of 5mv

 

[ryuuoh]

My SU-8080 claims some high specs for it's phono stage. Is it the same for the later amps?
http://www.thevintageknob.org/technics-SU-8080.html

 

[Glass Prison]

:thmbsp:
I have Technics SU-V8X, ive recently rewired the input wires(changed them with high quality solid core copper), and depending on the vinyl it can be quite at volume 2 then just a nudge over on some vinyl its full sound

I am asking V8 owners what the phono stage is like on their amps or anyone with experience with this amps phono.

My cart is a Nagaoka MP11 with a high ouput of 5mv

Loved my SU-V8 back in the day. I could run moving coil cartridges with ease.:thmbsp:

 

[Glass Prison]

My SU-8080 claims some high specs for it's phono stage. Is it the same for the later amps?
http://www.thevintageknob.org/technics-SU-8080.html

The Technics SU-8099 has a very nice phono section. You can run fairly low output moving coil cartridges. I should never sold that amp back in the day but I changed systems like socks then.

 

[Synchro-bias]

Hello Ryuuoh,
Yes that is an excellent amp for phono. One here Australian ebay but i missed it.

Hello Burhoe,
Thankyou. So a high output like my Nagaoka would sound great on a V8.

I found this awesome PDF explaining the V8 technology
http://www.gromit.dk/technics/su-v8.pdf

V8
Phono MM 2.8mV/47 Kohm
S/N rated power 4ohm
Phono MM 78db(88db, IHF'66)
Phono RIAA standard curve +/- 0.3dB (30Hz~ 15Khz)

V8X

Phono MM 0.25 mV ( 2.5mV, IHF66) / 47 kohm
S/N (IHF,A)
Phono 77dB (88dB, IHF'66, input 2.5mV)
Phono RIAA standard curve +/- 0.5dB