• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

Nice. I may buy a set of these for the bedroom. I am torn between that or moving my Enzos up to the bedroom and getting the Enzo XL for living room. Decisions, decisions...

Russellc
 
Breaking in my lore impulse speakers. Love them already.
Awesome!!! I'm sure they are "punchy" enough!! After some thought I flopped from the regular Lores. I reality I would have been happy with either-I've read enough about them-I can almost hear how they sound (yes-been around too many speakers over the years-and I'm a bit loopy!!)-and the sweet sound-and just how good the Pendragons and Enzo Xl's sound-sealed it for me. A mini Enzo Xl-perfect!! My modded ESS AMT'3s almost come to close to over powering my living room-but the Great Heil sound is a bit different-should be a very interesting comparison to say the least. The woofers I put in the ESS were pro/hifi hybrids, closer to pro-big 60 OZ magnets 2 1/2 inch voice coils and a huge flat spider-low ESR. Even with the rubber surrounds they are very sensitive and clean. With the exception of the Dayton ST255-8 I used here, I'm becoming more of a fan of cloth surround woofers over rubber, and cheap foams ones. They just seem cleaner and quicker-yet the paper still give the bass texture and "warmth" if you will. I'm getting to the point I can hear poly cone woofers a mile away!! Yuk!
 
Funny how folks tastes are. I have the Lore S in one room & Vandersteen 3Csomethings in another. Both sound great but are so dissimilar, I can't choose between them & have stopped trying. I figure its a good quandry to have... Let us know if you get the Seas Pendragons. I'm a fan of those drivers altho I have not done a head to head comparison between the Seas & the std Lore drivers.
I think its good to have a mix-the Tektons are priced so reasonably you have your choice-
That's why I put my first pair of ESS AMT3's up for sale- although the Tekton Impulse should be from the few models I've heard so far similar to the ESS but different as well.
Originally I was looking at the Enzo Xl-
But decided against it because of their size and similarity to what I have
I almost canceled the order for the impulse in favor of a mini lore because of their size weight- but after talking with Eric stuck with the Impulse- because this is closer to what I was looking for sound and size wise
The Impact was probably the ideal speaker for what I was looking for but the extra 6 inches and five to $600 difference depending on finish- made it tougher choice
Plus I like the simplicity of a full range two-way which I haven't had in years
Funny Reading a thread on parts express that really picked the Lore apart
Seems to me Eric's products and inevitable compromises seem to meet his design goals and profit margin- both important factors I for one am thoroughly impressed
The other stuff doesn't matter IMHO unless you're bored and just want to bash someone's products because you think you can do better!!!
 
I wondered if anyone had an opinion on my room in regards to the Tekton model that might work.
The room is 14 x 17 but stair case on one side makes a sloping inner wall on long side at about 14'.
The ceiling in this area is vaulted 20 feet flat ceiling.
My current set up is on the 17' side with listening position at about 12 ft and the back wall...well, back wall is way back in the kitchen at 33 feet.
The wonderful open floor plan. This is also first floor so basement under.

I currently use one of two stand mounts (Focal or Kef) with a small sub so I am just looking for a fuller sound, not necessarily extremely loud. My main concern is bass overload
while at the same time, I don't want to wimp out. I am currently listening to more rock in the progressive genre but I also listen to jazz and classical if it matters.
I've ruled out full Pendragons but other than that not sure. Any experiences you'd like to share I'd like to hear about them.
 
Sounds like a split level
I would talk to Eric but I think Enzos or any of the lore models would work
I have a split level too and I think the Enzo or Enzo XL's would be fine I just wanted something a little smaller physically
And I think the Lore Impulse has plenty of juice to fill the room up the sound but just a slightly less obtrusive package
 
Last edited:
For what its worth, my Enzos are great. Not as large as the Enzo XL, but these things are capable of not only low level magic, but can Rock out seriously without sounds of any strain. Bass, no doubt less than XLs, is very powerful with no need for a sub.

These were an impulse buy and I was leary....absolutely no need. They not only did everything I had hoped they would,
but they surprised me by going much, much further.

Being used to Large Altec Speakers and Econowaves with 15" JBL drivers, I want for nothing. But...I'm gonna have those Enzo XLs!

Russellc
 
Sure I may end up with the Enzo XL's eventually who knows.
I don't think you can go wrong with any of the speakers as they all pretty much do the same things just on different levels
They all seem to play well at lower volumes without any issues and we all seem to know about their mid to high level capabilities
And I think that's real beauty about his speakers he's being honest their steps of improvement but they're all built around the same theme
My recommendation would be to call Eric he's always available on the phone during the day and tell him about your listening room and requirements and he'll give you an awesome suggestion and I wiuld go at that you'll be completely happy I guarantee you!!
You're just not going to find this type of product and ability to talk with the creator and manufacture anywhere else totally awesome in my book!
 
I am beginning to wonder if hardly any of these "high efficiency" speakers are all that efficient. Lab measurements of two of the Zu speakers spec'ed at 97dB tested at 92-93 dB, and the Tekton Enzo XL spec'ed at 96.5dB measured at 90.6. Nearly a full 6dB under specs. I have tower speakers spec'ed at 91dB, which measured at 90.5. So if I changed over to the Enzo XL in an attempt to gain another 6dB of efficiency, and thus reduce the load on my amp by 75%, in reality I would realize no gain at all. Likewise if someone ran one of the on-line calculators to estimate how much power they would need to achieve a particular volume level in a specific sized room, and came up with say 6 watts for a 96.5dB speaker, well, you'd need 24 watts if that speaker was an Enzo XL.

I have nothing against the speaker or company. I just don't like these inflated sensitivity claims.
 
I've wondered about that as well. It's no secret that Eric likes his Spekaers with some grunt behind them... But lots of reviewers state they don't seem as sensitive as spec'd. I don't think there's so much market advantage that it's worth fudging the numbers. I wonder how it's figured at Tekton?

- Woody
 
In real life use my Zu Omens were more efficient than my 93 db Fostex Tektons and 93 db Tang Band W8-1808's.

With a 3 watt 2a3 SET I never felt a need for more power.
 
I have been contemplating my upgrade path vis-a-vis efficiency of speakers versus power output of the amp. (The speakers I have been drawn to seem to be lower efficiency so I feel like I want more power.)

I currently use 90db speakers with a 40 watt amp and 90 db speakers with a 70 watt amp. For my needs, these combos work well for the rooms and types of music and volumes I listen to MOST OF THE TIME.

The following thread might have been discussed last year but if you have not read it, I think it is worth reading.

Check out the video in post #9. Keep in mind, he is using 85db speakers. In a rather large room.

http://www.harbeth.co.uk/usergroup/showthread.php?2613-How-much-amplifier-power-do-I-REALLY-need

So, there is an incentive to fudge the numbers on equipment. Equipment manufacturers can measure their gear.(Seemingly getting away with subtle "mistruths") But then what about manufacture recommendations for pairing speakers and amplifiers for cost versus quality of sound?
 
Last edited:
I'd bet the ratings are a bit inflated as the M Lores didn't do all that well with a little t amp I had. I've measured them in my room though sucking up around 0.85 watts at loud 90ish avg db levels so who knows? I run mine off a 300wpc amp so I'll never really need to worry about their sensitivity.
 
It is quite common for manufacturers to state their sensitivity specs at 2 to 2.5 dB too high. I've seen this many times. But 6dB is very far off. Especially for a product which is promoted as a high efficiency speaker. The Enzo XL simply isn't high efficiency. And it makes one wonder about the rest of the product line.
 
My regular Enzo speakers are very efficient. I think Tekton claims 98dB. I don't know how close that is to actual but they are very efficient.

Also, they are a very easy load. I am not a single ended fan, but these seem like they may be suited to such an amp.

With a 25 to 40 watt class A Pass clone amp (depending on load) these are lovely at low levels or party speakers at very high levels. No sign of strain, speaker not sounding over driven at all nor is amp running out of steam.
 
The following thread might have been discussed last year but if you have not read it, I think it is worth reading.

Check out the video in post #9. Keep in mind, he is using 85db speakers. In a rather large room.

http://www.harbeth.co.uk/usergroup/showthread.php?2613-How-much-amplifier-power-do-I-REALLY-need

So, there is an incentive to fudge the numbers on equipment. Equipment manufacturers can measure their gear.(Seemingly getting away with subtle "mistruths") But then what about manufacture recommendations for pairing speakers and amplifiers for cost versus quality of sound?

Informative link.

I had a hard time playing the video from that link. But this one worked

 
I've known that one can use a lot of power. I have a 260 wpc amp driving speakers which are spec'ed at 91db, but may be a bit lower. I've driven that amp into clipping 3 times. Back in my youth.

I know a guy who uses 600 wpc amps to drive his Klipschorns. Which is crazy. Consider that demo, where it was taking 600 watts to drive those 85dB speakers at high volume in a large room. Even considering that, a K-Horn would have needed just 6 watts to hit the same volume levels.

I would like to watch that same demo, but with a subwoofer connected and filtering everything below 80Hz from those Harbeths.
 
Looks like a pair of awful hungry Harbeths to me. I have power meters on my Amp & it goes no where near clipping - the demo amp was living in the "red" zone. That goes for my notoriously inefficient Vandersteens & the Lore S's. Maybe the demo had the volume cranked or maybe its the type of music.... I'm not a techno music fan.
 
Well from the reviews, the sensitivity is high enough on most of his speakers to play clean and loud with e few watts.
Although Eric recommends at least 100 watts on up.
Most of this I imagine has to do with speaker control/ damping etc.
That's been my experience with ESS, Klipsch, and other very, or fairly sensitive speakers is that they become totally different animals with a high power amp.
You hear all of what they are really capable of doing.
 
Back
Top Bottom